Double walled inside chamber are made of S.S. 304 & outside made of M.S. duly powder coated / S.S. 304 & gap between two walls is fitted with high grade glass wool to minimize thermal loss. An oil bath is a type of heated bath used for laboratories, it is the most common for heating chemical reactions. It is most commonly used in research laboratories for reactions that require heating temp. up to 200°C. Oil baths provide more uniform heat compared to other heaters Optional : Microprocessor based PID Controller Stirrer

This is recommended only where inside condition air of jar is removed through vacuum pump and CO2 is filled in the jar through CO2 gas cylinder to generate anaerobic conducting in the jar. Transparent Anaerobic Culture Jar of 3.5 lit. capacity made of Polycarbonate. The lid of the jar is made of Aluminium Pressure die casting fitted with Pressure valve, Vacuum valve, Safety valve & Compound Pressure cum vaccum gauge, three finger aluminium clamp and sealing “O” ring and Air / Gas chuck. Supplied with: Petri Plate Carrier - Stainless steel for 10 petri Dishes. Test Tube Carrier - Stainless Steel.

Air Sampler System consists of a small controller unit with a sling and a handheld metal centrifugal air sampling probe.

6W handheld UV lamp for wavelengths 365 nm (long) & 254 nm (short)

(Double walled) Inner chamber made of Stainless Steel 304 & outer made of S.S. 304 /Mild steel duly Powder Coated. The top has 75 mm holes with concentric rings. Temperature ranges upto 99°C. Accuracy ±5°C in Microprocessor based PID Controller fitted with Neon Lamp indicator, main switch and work able on 220 Volt, 50 Hz. A.C.

(Double walled) Inner chamber made of Stainless Steel 304 & outer made of S.S. 304 /Mild steel duly Powder Coated. The top has 75 mm holes with concentric rings. Temperature ranges upto 99°C. Accuracy ±5°C in thermostatically Controlled fitted with Neon Lamp indicator, main switch and workable on 220 Volt, 50 Hz. A.C. Optional: Microprocessor based PID temperature controller with an accuracy of ±0.5°C. Water level cutoff device.

THERMOSTATICALLY CONTROLLED (Double walled) Inner Wall made up of S.S. 304 & Outer body made of M.S. Duly powder coated sheet / S.S. 304. The bath consists of 2 pilot lamps & on-off switch, immersion heaters. Temperature controlled by Thermostat from ambient temp.+5ºC to 95ºC ± 1ºC OR Temp. can be controlled by a Microprocessor based PID Controller, ambient +5ºC to 95ºC ± 0.5ºC.

Double-walled Inner Chamber S.S. 304 & Outer M.S. Duly Powder Coated / S.S. 304. PUF Insulated Temp. Range 5°C to 50°C Cooling Compressor. Copper Cooling Coils Welded throughout on the Outside of the S.S. Chamber. Body Mounted on sturdy Angle Iron Frame with Caster wheels for easy movability. Temperature controlled by Microprocessor Based PID Controller, provided with circulating Pump.

Optional: Microprocessor Based PID Controller

HOT PLATE (RECTANGULAR)

(S.S. 304 Body) With Soft touch Switches & Digital Timer The offered system is widely used for cleaning different products like jewellery, lenses, watches, optical parts, surgical instruments and number of electronic equipments. Our offered system cleans all the products with the help of ultrasound using appropriate cleaning solvent. Sonicator Bath Ultrasonic cleaners are especially effective for removing chemical residues from complex parts with crevices, small openings, and joints. In addition to cleaning validation, ultrasonic cleaners and baths are used by chemical and pharmaceutical laboratories for solvent degassing and sample preparation.

We will provide copper cooling coils around outer surface of the tank. Which will be properly insulated & will be connected to a condenser & compressor built-in the machine (Chiller system) this will control bath temperature as per your requirement.