For maintaining the temperature of critical biological specimens at desired level during microscopic observation. An anodized aluminum plate of less than 10 mm thickness with 50 mm central grove with glass which fits on most microscope stages Heated at desired temperature by a separate digital temperature display – cum controller with 2 meter long cable for convenient location. The temperature range is from ambient to 55°C with 0.2°C accuracy.

Plain concave mirror for bright field observation viewing the specimen stage in situations that require the frame to be placed backwards.

The vacuum pump functions by removing the molecules of air and other gases from the vacuum chamber. It is available in single-stage & Double Stage with oil & belt Motor System. It is designed for accurate measurement of melting points and for checking the melting range of the solid samples & boiling points also.

TWO-STAGE VANE PUMP To improve the backing pressure and displacement at low pressure two stages are connected in series. ANTI-SUCKBACK SYSTEM If the Power Supply fails on stops, an anti-suck back device. Prevents air or oil the pump to be drawn back into the chamber being evacuated and operated by Solenoid coil. GAS BALLAST The gas ballast allows a quantity of air to be injected into the second stage of the pump during compression to reduce the partial pressure to the pumped gas below its saturated Vapour pressure and thus prevent condensation. The saturated vapour pressure of a gas is higher when it is hot and lower when it is cold. When gas ballasting is in use, there will be increase in ultimate pressure of the pump as well as the temperature. Power : 230V AC supply Optional: Moisture Trap Non Return Valve Vacuum Gauge Air Oil Mist Exhaust Filter

Rotates specimens in horizontal plane in 3/4” circles, constructed of mild steel finished with stoved enamel point, Turned up edges and rubber sheeting on platform to prevent slipping of specimen containers, platform rigidly supported by steel legs for smooth and silent rotation, mounted on four rubber suction feet to prevent creeping.

“OPTICS TECHNOLOGY” Class III Bio safety cabinet offers the highest level of operator, product and environmental protection from infectious/biohazardous aerosols and is suitable for microbiological work. Designed for an absolute level of containment, it is frequently used for work involving the deadliest bio-hazards. A Class III cabinet is defined as a totally enclosed, ventilated cabinet with leak-tight construction it is also called glove boxes. The cabinet is maintained under negative pressure and supply air is drawn in through HEPA filters. A supply of HEPA filtered air provides product protection and prevents cross contamination of samples while exhaust air is HEPA-filtered and incinerated. Key Benefits: Safer dual main with 100% exhaust filters Exclusive dual main exhaust filters provide > 100.000 times better protection than single-stage designs. An integrated pass-through with interlocking doors permits materials transfer without risk of environmental contamination. An angled cabinet front ensures a comfortable working posture. Energy Efficient Blowers Optional: 1. Magnahelic Gauge in place of Static Pressure Manometer. 2. Digital Manometer 3. U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. 4. LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer 5. Imported Gloves 6. Automatic motorised front door lifting arrangement 7. Online transfer of data without any cable/wire Interference MICROPROCESSOR BASED TOUCH SCREEN DISPLAY SYSTEM Display of velocity with lower and upper safe limits. Display of total run time of instrument & timer for U.V. lamp Control of U.V. light to prevent the operator from U.V. rays as and when required. Automatic Door sensors to switch off the U.V. light when door is opened. Display of message for life of HEPA filter, U.V. light etc. With Glove Port (Without Gloves) Outer Body: Wooden / Mild Steel Duly Powder Coated / Stainless Steel (S.S. 304)

The apparatus is suitable for testing of Dissolution rate of tablet and capsule, it consists of main transparent acrylic tank housing. Thermostatically/ Digitally controlled immersion heater, drain cock and transparent hemispherical unbreakable vessel. The base unit is made of chemical resistant powder coated sturdy frame housing, Control panel which includes Electronic regulator and thermostat. An electronic motor is mounted on chrome plated rod, operates Paddle/Basket. (Body is Available in M.S. / S.S. 304). Optional: Digital RPM Indicator Digital Timer Microprocessor Based PID Controller

The unit is equipped with acrylic water bath controlled by digital temperature controller which is normally set at 37ºC and duly fitted with pump which recirculates the water thus maintaining homogeneous temperature. The acrylic water bath is with digital timer can be set ranging from 1 to 999 minutes add it “BEEPS” at the end of the set time. The unit is equipped with Digital setting of RPM as an optional which can be controlled from 25 to 150 RPM. The equipment is duly fitted with motorized lifting to facilitate easy operation of the stirrers’ assembly. Digital dissolution rate test apparatus is equipped With Digital RPM Indicator – Range 25 to 150 RPM Digital Timer – Range 1 to 999 minutes Digital temperature indicator – Range 30ºC to 50ºC Body is available M.S. / S.S. 304

The test is used for determining liquid absorptiveness or resilience of treated and untreated paper, board, fabrics and other sheet materials. The test consists of a test apparatus, its 10 kg roller and blotting paper. The roller method is recommended to insure better consistency and reliability that can be obtained by manual blotting or rubbing the specimen. Specification: Standard test area : 100 cm2 Metal roller : 10 kg + 0.5 kg Dimensions: Depth : 150 mm Height : 275 mm Width : 330 mm Features: ➤ One Universal model to test paper, Board and water proof board. ➤ Three graduations of height 10, 25 and 100 mm as specified in TAPPI 441 for Paper, Corrugated Board and Waterproof Board respectively. ➤ Adjustable clamp pressure mechanism for necessary required clamping pressure to prevent water leakage during clamping. ➤ Aluminium Block and steel Roller for rust proof and longer life.