These are overhead clean air modules mounted with Stainless steel frame on the ground. Units can be built with / without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling / Dispensing of Raw Material, Basic Compounds, Active Compounds. It works on the principal of Laminar Air Flow with HEPA Filters & Pre-Filters. This will act as a CLASS 100 Room. Protection of the personnel in the cabinet from the processed substances by vertical flow with Reverse Flow of clean air protection of the raw and intermediate products to be processed. Protection of the room where the cabinet is built up and environment from highly active substance which otherwise would disperse in the room and escape in the atmosphere unfiltered. Safe collection and deposition of substance released during work. Features: • M.S Powder Coated / Stainless Steel 304 Body • Hepa Filter (0.3 Micron) • Fine Filter (5 micron) • Pre-Filter (10 micron) at Arrestance 90% • Motor Blower Assembly • U.V. Light • Fluorescent Lamp Operating Switch • Static Pressure Manometer • Stainless Steel Standing Base • High quality HEPA filter provides protection for the product (filtration • efficiency of more than 99.97% at 0.3 micron). • Ultra-quiet noise level of not more than 65 dBA. • Durable and easy to clean stainless steel body. • Work area properly illuminated by diffused glare free fluorescent light. PVC Flexible Curtains on all the three sides. Specifications: Air Velocity : 90 ± 20 FPM (Average) Filtration Elements : Main Filters - HEPA Filter Prefilter : Washable non-woven polyester fibers. Light Intensity : 800-1000 Lux Power Supply : 220V Single Phase, 50 Hz. Model No. Working Size W x D x H OT-SB-215-MS/SS-A 2' X 2' X 6' OT-SB-215-MS/SS-B 3' X 2' X 6' OT-SB-215-MS/SS-C 3' X 3' X 6' OT-SB-215-MS/SS-D 4' X 2' X 6' OT-SB-215-MS/SS-E 4' X 3' X 6' OT-SB-215-MS/SS-G 6' X 4' X 6' OT-SB-215-MS/SS-H 6' X 6' X 6' OT-SB-215-MS/SS-I 8' X 4' X 6' OT-SB-215-MS/SS-J 8' X 6' X 6' OT-SB-215-MS/SS-K 8' X 8' X 6'

“OPTICS TECHNOLOGY” Class III Bio safety cabinet offers the highest level of operator, product and environmental protection from infectious/biohazardous aerosols and is suitable for microbiological work. Designed for an absolute level of containment, it is frequently used for work involving the deadliest bio-hazards. A Class III cabinet is defined as a totally enclosed, ventilated cabinet with leak-tight construction it is also called glove boxes. The cabinet is maintained under negative pressure and supply air is drawn in through HEPA filters. A supply of HEPA filtered air provides product protection and prevents cross contamination of samples while exhaust air is HEPA-filtered and incinerated. Key Benefits: Safer dual main with 100% exhaust filters Exclusive dual main exhaust filters provide > 100.000 times better protection than single-stage designs. An integrated pass-through with interlocking doors permits materials transfer without risk of environmental contamination. An angled cabinet front ensures a comfortable working posture. Energy Efficient Blowers Optional: 1. Magnahelic Gauge in place of Static Pressure Manometer. 2. Digital Manometer 3. U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. 4. LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer 5. Imported Gloves 6. Automatic motorised front door lifting arrangement 7. Online transfer of data without any cable/wire Interference MICROPROCESSOR BASED TOUCH SCREEN DISPLAY SYSTEM Display of velocity with lower and upper safe limits. Display of total run time of instrument & timer for U.V. lamp Control of U.V. light to prevent the operator from U.V. rays as and when required. Automatic Door sensors to switch off the U.V. light when door is opened. Display of message for life of HEPA filter, U.V. light etc. With Glove Port (Without Gloves) Outer Body: Wooden / Mild Steel Duly Powder Coated / Stainless Steel (S.S. 304)

Applications include isolation and indentification of plant/human pathogens, work in virology, tissue culture, sterility testing and recombinant DNA research. This Biohazard Cabinet offers operator protection from low to moderate risk biological agents (or chemical carcinogens), while providing a sterile work environment for the procedure. The cabinet is kept under negative pressure with partial quantity of recirculated air exhausted through a HEPA filter. External exhaust from the laboratory is optional. The Biological Safety Cabinet is similar in performance and specification to the Vertical Series, described on reserse. The additional main features are as under:- Specially suited for Pathogenic work, chemical work, critical biological work involging virus and pathogens & for microbiology, biochemistry etc. Standard S.S. Perforated table. Imported Mini Pleat HEPA of 0.3 µ of an efficiency of 99.97% down to 0.3 micron Media is of glass fiber & made of pleats back & fro in an anodized aluminum frame (With Test Report). Integral powerful exhaust system. Built-in-positive Air Curtain effect to prevent inside air from going out and room air from entering in, providing total process and operator safety. Exhaust ducting to carry the air outside. Front sliding door, U.V. light, Manometer, Gas cock etc. Mini Pleat HEPA Filter in Exhaust. Virus Burn out Unit in Exhaust. FACE VELOCITY: A face velocity of 90±20 FPM is maintained. Optional: Magnahelic Gauge in place of Static Pressure Manometer. Digital Manometer U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer Gloves Port (Without Gloves) Automatic motorised front door lifting arrangement Online transfer of data without any cable/wire Interference MICROPROCESSOR BASED TOUCH SCREEN DISPLAY SYSTEM Display of velocity with lower and upper safe limits. Display of total run time of instrument & timer for U.V. lamp. Control of U.V. light to prevent the operator from U.V. rays as and when required. Automatic Door sensors to switch off the U.V. light when door is opened. Display of message for life of HEPA filter, U.V. light etc.

To maintain Temp. below 35°C Inner body is made of S.S. 304. Outer Body made of M.S. Duly Powder Coated / S.S. 304 Temp. Controlled by Microprocessor Based PID Controller With an Accuracy of ± 0.5°C Temp. Range +5°C to 50°C “Hermetically sealed” CFC Free Compressor of “Kirloskar” / Tecumseh with kit (Condensor, Fan, Motor, Compressor in 1 set) The inner chamber is properly insulated with special PUF to prevent thermal losses. Heating by Stainless Steel heaters with fins. Full length inner view flexi glass door. Lock & Key arrangement Caster wheel mounted cabinet for easy movability With 2 No. Air Circulating Fan for uniform temperature. Eco friendly CFC free compressor Special Features: Door operated Light illumination system inside the chamber. Specially designed adjustable S.S. wire mesh Shelves for uniform Temp. Specially designed voltage protection device to protect the instrument from voltage fluctuation. Digital Graphical Display of Voltage. With Automatic On/Off Function system for Fan Calibration Certificate with NABL Traceability will be provided free of cost.

To maintain Temp. below 35°C Inner body is made of S.S. 304. Outer Body made of M.S. Duly Powder Coated / S.S. 304 Temp. Controlled by Microprocessor Based PID Controller with an Accuracy of ± 0.5°C Temp. Range +5°C to 50°C “Hermetically sealed” CFC Free Compressor of “Kirloskar” / Tecumseh with kit (Condenser, Fan, Motor, Compressor in 1 set) The inner chamber is properly insulated with special PUF to prevent thermal losses Heating by Stainless Steel heaters with fins. Full length inner view flexi glass door. Lock & Key arrangement Caster wheel mounted cabinet for easy movability With 2 No. Air Circulating Fan for uniform temperature. Eco friendly CFC free compressor Special Features: Door operated Light illumination system inside the chamber. Specially designed adjustable S.S. wire mesh Shelves for uniform Temp. Specially designed voltage protection device to protect the instrument from voltage fluctuation. Digital Graphical Display of Voltage With Automatic On/Off Function system for Fan Calibration Certificate with NABL Traceabilit will be provided free of cost. Optional: Microprocessor Based Touch Screen Display System Online transfer of data without any Cable/Wire interference 21 CFR Software (For Non-Editable Data)

Electric Mortar and Pestle is an automated mortar mill that uniformly grinds, homogenizes and mixes a range of solid materials in wet, dry condition. The sample to be processed is pulverized between the mortar and pestle at uniform speed thereby helping in reproducible results. Specifications: Material : Agate Speed : 50-130 rpm Pestle Position : Vertical Power Supply : 220V, 50/60 Hz Features: • Magnetic Lock designed for safe operation • Suitable for dry, wet grinding • Easy to clean and operate • Mortar and Pestle is of agate Model No. Size OT-EAMP-182/1 4“ OT-EAMP-182/2 6”

Optics Technology semi automatic microtome which is the most advanced sectioning equipment for medical colleges, universities, research laboratories, hospitals and educational institutes at an impressive price / performance ratio and leaves nothing to be desired of in its class. Motorized advanced and retract keys allow for smooth, precise positioning of the microtome chuck to the blade holder. Features • LCD Display with feather touch keypad • Cutting/Trimming Mode • Fast Forward/Backward Function • Increase/Decrease Section Thickness • Adjustable Retraction • Motorised Feed Drive • Finger Protection Guard • Standard/Universal Cassette Clamp

• Automatic Rotor identification • Safety lid interlock to prevent lid opening during centrifugation • Imbalance detection & centrifugation stop with the display of error Motor overload protection • Gas hinge to prevent falling off door • Emergency lid lock release • Microprocessor Based Digital Controller (LCD Display) • Automatic Locking System of the Lid • Maximum speed: 10000 RPM

Specification: Accurate screening and material control High screening capacity Improved hygiene and cleanability M.O.C. of contact parts - SS 304 Wire Mesh count / opening - upto 100# (Mesh) SS 304 Material of Wire Mesh - Stainless Steel Grade SS 304 Motor type - Standard Motor Protection IP 55 Material Grade: Stainless Steel 304 / Mild Steel Duly Power Coated Size: 24' 30' 36'