SIEVES OF DIFFERENT SIZES IN BRASS OR STAINLESS STEEL

Air Flow: Vertical With Working table of S. S. 304 Body is made of Wooden/ M.S. Duly Powder Coated/ S.S. 304 Imported Mini Pleat HEPA Filter of 0.3µ of an efficiency of 99.97% down to 0.3µ media is of glass fiber & made of pleats back & frown in a anodized Aluminum frame. Prefilter of dry fiber washable type with the frame of on all the sides Confirm the international standards 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level is very low Vibration is also very low Normal working fluorescent Light Static pressure Manometer U. V. Light 1 x 30/15 watts Front Door of Acrylic Sheet (Transparent) Gas cock Or any non standard size Optional: Magnahelic Gauge in place of Static Pressure Manometer. Digital Manometer U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. Automatic Safety system for U.V. light. Automatic start system filtered Air & Normal light in Laminar Air Flow LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer Automatic motorised front door lifting arrangement Online transfer of data without any cable/wire Interference MICROPROCESSOR BASED TOUCH SCREEN DISPLAY SYSTEM Display of velocity with lower and upper safe limits. Display of total run time of instrument & timer for U.V. lamp Control of U.V. light to prevent the operator from U.V. rays as and when required. Automatic Door sensors to switch off the U.V. light when door is opened. Display of message for life of HEPA filter, U.V. light etc.

Working table of S.S. 304 Body is made of Wooden/ M.S. Duly Powder Coated/ S.S. 304 Imported Mini Pleat HEPA Filter of 0.3μ of an efficiency of 99.97% down to 0.3μ media is of glass fiber & made of pleats back & frown in a anodized Aluminum frame. Pre filter of dry fiber washable type with the frame of on all the sides. Confirm the international standards 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level is very low Vibration is also very low. Normal working fluorescent Light. Static pressure Manometer U. V. Light 1 x 30/15 watts. Front Door of Acrylic Sheet (Transparent) Or any non standard size Optional: Magnahelic Gauge in place of Static Pressure Manometer. Digital Manometer U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. Automatic Safety system for U.V. light. Automatic start system filtered Air & Normal light in Laminar Air Flow LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer Automatic motorised front door lifting arrangement Online transfer of data without any cable/wire Interference

Laboratory fume hoods are one of the most important components used to protect laboratory personnel from exposure to hazardous chemicals and agents used in the laboratory. Cabinet is made of : Wooden Body / M.S. Duly Powder Coated / Stainless Steel (304). Interiors acid resistant material coated with fire proof epoxy paint & further fixed on storage cabinet. Working table is covered with Granite Front door is made of 6mm clear Toughened glass. Counter weight balance Front Door. Vertical sliding facility & the front door can be stopped at any point. Exhaust blower consists of single phase motor connected with a PVC Exhaust Ducting. Standard ducting upto 6’ is provided. OR ANY NON STANDARD SIZE. Optional: Base Storage Cabinet P.P. Sink with Swan Neck Water Tap Air flow monitor (LCD Display) Automatic Motorized front door lifting arrangement Touch Screen Display with Air Flow Monitor Scrubber System

(One above the other with individual temperature controlling temp. range + 5°C to 50°C) Inner chamber made of S.S. 304 and outer body made of M.S. Duly powder coated body or stainless steel (S.S. 304) with independent controlling of temperature having independent control boxes and independent doors. Working size as below in each chamber both 2 Nos. compressors are fitted at the bottom of whole unit castor wheel mounted cabinet for easy mobility with 2 nos. microprocessor based PID controller. OR ANY SPECIAL SIZE Optional : 2 Nos. Microprocessor based Touch Screen Display System Online transfer of data without any Cable/Wire interference 21 CFR Software (For Non Editable Data)

Double wall construction with inner Chamber Stainless Steel (S.S. 304) & Outer Body M.S. duly powder coated / Stainless Steel 304 Mounting One above the other with individual control box in the sides. Independent Doors. Independent controlling of temperature by 2 nos. microprocessor based PID controller. Removable SS wire mesh trays. The inner chamber is properly insulated with Glass Wool to prevent thermal losses. With Air Circulating Fan. OR ANY NON STANDARD SIZE Optional : 2 Nos. special Heavy-Duty Air Circulating fan system for continous Non-stop working 2 Nos. Microprocessor based Touch Screen with Pen Drive for data logging, Printing through PC communication & saving of data in PC Online transfer of data without any Cable/Wire interference 21 CFR Software (For Non Editable Data)

These are overhead clean air modules mounted with Stainless steel frame on the ground. Units can be built with / without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling / Dispensing of Raw Material, Basic Compounds, Active Compounds. It works on the principal of Laminar Air Flow with HEPA Filters & Pre-Filters. This will act as a CLASS 100 Room. Protection of the personnel in the cabinet from the processed substances by vertical flow with Reverse Flow of clean air protection of the raw and intermediate products to be processed. Protection of the room where the cabinet is built up and environment from highly active substance which otherwise would disperse in the room and escape in the atmosphere unfiltered. Safe collection and deposition of substance released during work. Features: • M.S Powder Coated / Stainless Steel 304 Body • Hepa Filter (0.3 Micron) • Fine Filter (5 micron) • Pre-Filter (10 micron) at Arrestance 90% • Motor Blower Assembly • U.V. Light • Fluorescent Lamp Operating Switch • Static Pressure Manometer • Stainless Steel Standing Base • High quality HEPA filter provides protection for the product (filtration • efficiency of more than 99.97% at 0.3 micron). • Ultra-quiet noise level of not more than 65 dBA. • Durable and easy to clean stainless steel body. • Work area properly illuminated by diffused glare free fluorescent light. PVC Flexible Curtains on all the three sides. Specifications: Air Velocity : 90 ± 20 FPM (Average) Filtration Elements : Main Filters - HEPA Filter Prefilter : Washable non-woven polyester fibers. Light Intensity : 800-1000 Lux Power Supply : 220V Single Phase, 50 Hz. Model No. Working Size W x D x H OT-SB-215-MS/SS-A 2' X 2' X 6' OT-SB-215-MS/SS-B 3' X 2' X 6' OT-SB-215-MS/SS-C 3' X 3' X 6' OT-SB-215-MS/SS-D 4' X 2' X 6' OT-SB-215-MS/SS-E 4' X 3' X 6' OT-SB-215-MS/SS-G 6' X 4' X 6' OT-SB-215-MS/SS-H 6' X 6' X 6' OT-SB-215-MS/SS-I 8' X 4' X 6' OT-SB-215-MS/SS-J 8' X 6' X 6' OT-SB-215-MS/SS-K 8' X 8' X 6'

( Stainless Steel SS 304 with HEPA Filter ) These specially designed cabinets provide a wash of sterile filtered, clean air through Imported Mini Pleat HEPA Filters having an efficiency of 99.97% down to 0.3 micron particle size. This cabinet protects dust and other particulates on clean room garments or other materials. For use in the change Room for garment storage & inside the clean room for storage of materials. Self standing cabinet provides down flow clean air to clean room garments. Features: Wooden / M.S. Duly Powder Coated / Stainless Steel 304 Body. Can be designed in Horizontal air flow system also. “All visible exposed surfaces white laminated, giving high impact resistance with smart clean appearance.” Large interior capacity for handling upto 20 garments at a time. Special provision for wire mesh shelves (optional) for component storage. Low power consumption suitable for operation on single phase supply. Any non standard size can be made on order. Applications: Pharmaceuticals Industries, R & D Laboratories, Hospitals Electronic Components and Semiconductor Industries, Photographic Laboratories, Optical Instruments Industries. Model No. Working Size L x B x H OT-SGS-216-W/MS/SS-A 2' x 1.5' x 3.0' OT-SGS-216-W/MS/SS-B 2' x 2.0' x 3.0' OT-SGS-216-W/MS/SS-C 3' x 1.5' x 4.5' OT-SGS-216-W/MS/SS-D 3' x 2.0' x 4.5' ' OT-SGS-216-W/MS/SS-E 4' x 1.5' x 4.5 OT-SGS-216-W/MS/SS-F 4' x 2.0' x 4.5' Optional: Magnehelic Gauge

Specifications: • Effective and Continuous crushing, leading to increase production and faster return on investments. • Heavy Duly Whilley Mill for Continuous working. • Suitable for Wet-Pulpy and Dry crushing. • No wastage of product and no pollution hazards. • The Whilley Mill almost all Spices, green chilies, fresh ginger, garlic, salt, sugar, coffee, fresh fruits, fruit pulp, vegetables, tobacco, herbs, beetle nuts, herbs roots, leaves, bark of trees, oil cake, cattle and poultry feeds, icing sugar, costarred powder, instant food, food colors and allied food production. • Provided with Set of 5 Nos. perforated round hole screens, 1 No. Brush for cleaning of machine Compact Size: 56 x 38 x 69 cm