Triple Walled Working up to 22 PSI to 25 PSI, Working Temp. 121ºC to 134°C. The inner chamber is made of thick Stainless Steel 304, with the steam stock facility. The outer body is made of thick Stainless Steel 304 / M.S. Duly Powder-Coated body, chamber is absolutely Leak Proof Chamber. Fitted with Digital Temp. Controller cum Timer. It is provided with pressure gauge, pressure release valve, Pressure Stat, Safety Valve, With water Level indicator with cord, Plug, Pressure Control Switch, S.S. Lid, Safety Valve for jacket & Dead Weight With wing nut System, With Water Level cut-off device for safety of Heaters. Optional: Vacuum Breaker Valve Calibration Port Safety Alarm 21 CFR Software (Only with touch screen model) Automatic System OR Microprocessor Based Automatic Touch Screen Display system with Data Logging

The tank has been designed to accommodate casted cubes and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each cube. Product Specification: Material : SS/MS Body Power Supply : 220V Temperature Accuracy : ±1°C Usage/Application : Curing of Concrete Block Working Temperature : 27°C Voltage : 220V Frequency : 50 Hz Phase : Single Size : 4x3x2 Feet (700Ltrs.) Note: Size are also customized The tank has been designed to accommodate cube moulds and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 27°C ± 1°C and expect for the 15 minutes after immersion of the freshly made specimens. As per comply IS 269 & IS 516 (Methods of tests for Strength of Concrete) after the period of 24 hours, specimens of Cubes, cylinders, beams etc. shall be marked for later identification, removed from the moulds and, unless required for 24 hours. Records of the daily max. & Min. temperature shall be kept both during the period of specimen remain on the site and in the laboratory.

Cement Autoclave comes with great accuracy and is a cost-effective model for conductive accelerated soundness test of the cement. Double Walled with six glass wool insulation mounted on a sturdy supporting frame. The attached control unit is enclosed by a Microprocessor based PID controller, pressure gauge and spring-loaded safety valve of brass. Technical Specification: ➤ Material: SS/MS Body ➤Size: 150 x 500 mm ➤ Working Pressure 21 ± 1kg/cm2 at 215°C ➤ Tested on up to 2.5 times the normal working pressure Fast and reliable accurate results Equipped with wing nut locking system

Technical Specification: ➤ Material : SS/MS Body ➤Size : 150 x 500 mm ➤ Working Pressure 21 ± 1kg/cm2 at 215°C ➤ Tested on up to 2.5 times the normal working pressure ➤Fast and reliable accurate results ➤Equipped with wing nut locking system

The vacuum pump functions by removing the molecules of air and other gases from the vacuum chamber. It is available in single-stage & Double Stage with oil & belt Motor System. It is designed for accurate measurement of melting points and for checking the melting range of the solid samples & boiling points also.

(S.S. 316 BODY) Seal membrane by hand tightening locking wing nuts, optimal holder designed to minimizes resistance and maximizes flow rate. Applications: Use in line for filtering gases or liquids Use with pressure vessel for batch type operations

Fumigators for Pharmaceutical, Food & Dairy, Biotech industries generate high density fog with droplets size of 5-15 microns, which helps in providing maximum thrust, deeper penetration & wide spread of aerosols. Some of the common application areas it is used in this industry include Injectable, Vaccines, Tablets, Parentrals, IV fluids, Medical devices, bulk drug manufacturing areas, QC & QA areas, Microbiology lab, R&D Center, Clinical drug trial centre, Tissue culture Laboratories, Pathology Laboratories and many more. Capacity 6 Ltr. Optional : Humidistat (To Control Humidity) (Knob Type) OR Digital Humidity Controller Mechanical Timer (0-60 minutes) OR Digital Timer 360° Rotation System

D.C. Motor special system shaker to work on 220 Volts A.C. for variable and smooth function speed control by speed regulator. It is general purpose machine and found useful for mixing or agitation ingredients, solution in flasks, bottles, beakers and kahn racks etc. Upper tray covered with rubber floor and sides of the tray are slotted to take parallel and cross bars cover with rubber. The bars are tightened with washers and fly nuts which can be adjusted as per the requirement. Optional: Digital RPM Indicator Mechanical Timer OR Digital Timer It can carry any Flask of size 100ml, 250ml, 500ml. Body is made of mild steel duly powder coated

MICROPROCESSOR BASED TOUCH SCREEN DISPLAY SYSTEM