Microprocessor based Touch screen display system with special features Automatic System With features like SETTING Sterilization Temp. Soak Time Purge On / Off set point Exhaust Set Point High Alarm Set Point ETC. Digital Pressure Indication with respect to temperature. Touch Screen (for Data Logging through PEN DRIVE) Pen Drive for saving of data for printing through PC communication Graphical presentation of Pressure with respect to Temperature Error indications (Both audible and visible) for Low water Level, Sensor Failure and High Temperature Cross Limit Optional: Vacuum Breaker Valve Calibration Port Specially designed Lid locking system to make sure lid is locked properly Printing system with thermal printer 21 CFR Software

DIGITAL TEMPERATURE CUM HUMIDITY INDICATOR

INDICATOR (Contact Type) Battery Operated With S.S. Temperature Probe

nner chamber is made of thick Stainless Steel (304). Outer body is made of thick Mild Steel / Stainless Steel 304. The chamber is absolutely leak proof and can be operated at any Selected point in between 5 to 20 pounds per sq. Inch. It is provided with pressure gauge, pressure release valve, S.S. Basket, safety valve, water level indicator with cord, Plug & Pressure Control Switch. It is provided with Radial Locking System with Automatic Water Level cut off device for element as a safety feature and Digital Temp. Controller Cum Timer. Temperature Range 121ºC ptional: Vacuum Breaker Valve Calibration Port Safety Alarm Specially designed Lid locking system to make sure lid is locked properly Single channel data logger system (Only with Automatic Model) Printing System with Thermal Printer 21 CFR Software Automatic System (Only for Normal Autoclave Vertical Model) OR Microprocessor Based Automatic Touch Screen Display System with Data Logging

TWO-STAGE VANE PUMP To improve the backing pressure and displacement at low pressure two stages are connected in series. ANTI-SUCKBACK SYSTEM If the Power Supply fails on stops, an anti-suck back device. Prevents air or oil the pump to be drawn back into the chamber being evacuated and operated by Solenoid coil. GAS BALLAST The gas ballast allows a quantity of air to be injected into the second stage of the pump during compression to reduce the partial pressure to the pumped gas below its saturated Vapour pressure and thus prevent condensation. The saturated vapour pressure of a gas is higher when it is hot and lower when it is cold. When gas ballasting is in use, there will be increase in ultimate pressure of the pump as well as the temperature. Power : 230V AC supply Optional: Moisture Trap Non Return Valve Vacuum Gauge Air Oil Mist Exhaust Filter

Heating block type Temperature range from 5°C above ambient to 150°C ± 1°C. Designed with glass reactions vessels and air condensers. Supplied with stand to accommodate vessels Operate on 230 volts, 50 Hz, single phase. With Digital Temperature controller cum digital timer along with glass parts.

Temp Controlled By Microprocessor Based PID Controller Temp range: (+) 2°C to (+) 8°C CFC Free Compressor. Caster wheel mounted cabinet. With LED Light The inner chamber is properly Insulated with special grade PUF to prevent thermal losses. Air Circulating Fan for uniform temperature.

Shows digital display of Temperature in °C. • For Determination of Melting Points upto 350°C • Provision for 3 melting point tubes • Magnifying lens and shadow less illumination of capillaries • Fine temp. control • It Has the facility to hold the temp.

Cylindrical Silicon Oil Bath Built in Magnetic Stirrer with Electronic Speed Controller Electronic Controller for Adjusting Heating Rate Digital Display of Temperature Glare – Free Background Light with Adjustable Light Intensity Provision for Holding the Melting Point Display Temperature Range 2°C above Ambient to 275°C, Readability 0.1°C