Air Flow: Vertical With Working table of S. S. 304 Body is made of Wooden/ M.S. Duly Powder Coated/ S.S. 304 Imported Mini Pleat HEPA Filter of 0.3µ of an efficiency of 99.97% down to 0.3µ media is of glass fiber & made of pleats back & frown in a anodized Aluminum frame. Prefilter of dry fiber washable type with the frame of on all the sides Confirm the international standards 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level is very low Vibration is also very low Normal working fluorescent Light Static pressure Manometer U. V. Light 1 x 30/15 watts Front Door of Acrylic Sheet (Transparent) Gas cock Or any non standard size Optional: Magnahelic Gauge in place of Static Pressure Manometer. Digital Manometer U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. Automatic Safety system for U.V. light. Automatic start system filtered Air & Normal light in Laminar Air Flow LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer Automatic motorised front door lifting arrangement Online transfer of data without any cable/wire Interference MICROPROCESSOR BASED TOUCH SCREEN DISPLAY SYSTEM Display of velocity with lower and upper safe limits. Display of total run time of instrument & timer for U.V. lamp Control of U.V. light to prevent the operator from U.V. rays as and when required. Automatic Door sensors to switch off the U.V. light when door is opened. Display of message for life of HEPA filter, U.V. light etc.

These are overhead clean air modules mounted with Stainless steel frame on the ground. Units can be built with / without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling / Dispensing of Raw Material, Basic Compounds, Active Compounds. It works on the principal of Laminar Air Flow with HEPA Filters & Pre-Filters. This will act as a CLASS 100 Room. Protection of the personnel in the cabinet from the processed substances by vertical flow with Reverse Flow of clean air protection of the raw and intermediate products to be processed. Protection of the room where the cabinet is built up and environment from highly active substance which otherwise would disperse in the room and escape in the atmosphere unfiltered. Safe collection and deposition of substance released during work. Features: • M.S Powder Coated / Stainless Steel 304 Body • Hepa Filter (0.3 Micron) • Fine Filter (5 micron) • Pre-Filter (10 micron) at Arrestance 90% • Motor Blower Assembly • U.V. Light • Fluorescent Lamp Operating Switch • Static Pressure Manometer • Stainless Steel Standing Base • High quality HEPA filter provides protection for the product (filtration • efficiency of more than 99.97% at 0.3 micron). • Ultra-quiet noise level of not more than 65 dBA. • Durable and easy to clean stainless steel body. • Work area properly illuminated by diffused glare free fluorescent light. PVC Flexible Curtains on all the three sides. Specifications: Air Velocity : 90 ± 20 FPM (Average) Filtration Elements : Main Filters - HEPA Filter Prefilter : Washable non-woven polyester fibers. Light Intensity : 800-1000 Lux Power Supply : 220V Single Phase, 50 Hz. Model No. Working Size W x D x H OT-SB-215-MS/SS-A 2' X 2' X 6' OT-SB-215-MS/SS-B 3' X 2' X 6' OT-SB-215-MS/SS-C 3' X 3' X 6' OT-SB-215-MS/SS-D 4' X 2' X 6' OT-SB-215-MS/SS-E 4' X 3' X 6' OT-SB-215-MS/SS-G 6' X 4' X 6' OT-SB-215-MS/SS-H 6' X 6' X 6' OT-SB-215-MS/SS-I 8' X 4' X 6' OT-SB-215-MS/SS-J 8' X 6' X 6' OT-SB-215-MS/SS-K 8' X 8' X 6'

Laminar Air flow with hanging construction can be used everywhere, where is necessary not only to do the working process in dust-free spaces but also fully to eliminate vibration caused by laminar flow cabinets. The body is made of wooden / M.S. Duly Powder Coated / S.S. Body. Imported Mini Pleat HEPA of 0.3µ of efficiency of 99.97% down to 0.3µ media is of glass fiber & made of Pleats. Pre-filter of dry fiber washable type with the frame on all sides. Confirm the international standard 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level & Vibration is very low. Normal working fluorescent Light. Static pressure Manometer. U. V. Light 1 x 30/15 watts.

It consist of an inbuilt prefilter & very high exchanging capacity non-corrosive CATION & ANION Resin, columns prefilled with imported Resins for efficient results having treated water parameters. Fitted with a sturdy PVC multi control valve & can be connected direct to water taps. Fitted with analog / digital conductivity meter. Supplied with one plastic chemical proof regeneration tank & the complete unit is housed in a painted M.S. trolly for easy mobility. Features: • Digital Display • Non corrosive Regeneration Tank •In Built Pre filter High capacity Cation and Anion exchange resins. Upflow treatment. Easily portable - metal stand and trolley Can be connected direct to Water Tap. Simple Periodic regeneration - negligible operating costs. Digital model is fitted with digital conductivity meter. Treated water will have the conductivity less than 10 ms/cm and pH of 7.5-9 • Available in Double Bed, Four bed and Mixed bed models Capacity: 50 Ltrs / Hr. 70 Ltrs / Hr. 100 Ltrs / Hr. 200 Ltrs / Hr. 500 Ltrs / Hr.

(S.S. 316 BODY) Seal membrane by hand tightening locking wing nuts, optimal holder designed to minimizes resistance and maximizes flow rate. Applications: Use in line for filtering gases or liquids Use with pressure vessel for batch type operations

An automatic Ice machine for your hygienic Ice flakes requirement in research laboratories, chemicals, pharmaceuticals, medical, biotechnological and hotel industries. The machine utilizes running tap water and converts it in the form of ice flakes continuously. It is a compact, self contained unit, covering less floor area & easily installable. Constructions: Ice flaker is housed in styled Stainless Steel 304 body with stainless steel made bin with no chances of corrosion. Ice crusher used is GERMAN CRUSHER made of S.S. to give life long performance. Water is introduced into crusher assembly through a precision float valve. The inflow of water is smoothly controlled by this float valve for maintaining a required level of water irrespective of variation in pressure at the water input line with automatic cut off in case of Low water / No water supply. Ice flakes are collected into a well-insulated/ (PUF) stainless steel container. So it stays for longer time. The removal of flakes is easily possible through the stainless steel Top door which can be opened with handle while removing the ice. Moreover the equipment fitted with an ICE LEVEL CONTROLLER which will put off the system in case ice gets accumulated in the container more than the required level. Hence, there is no need of an operator being on the machine all the time. The ice controller is provided with a drain line for occasional cleaning of the container.

A medical grade Air Purifier which has HEPA filter, High grade prefilter absorbs odors and toxic gases. HEPA filter removes 99.97% of airborne particles, including mold, spores, and tobacco smoke. UV lamp is effective in eliminating bacteria and viruses smaller then 0.3 microns. Lab tests have shown that 90% of the bacteria and viruses are eliminated in the first pass.

Working table of S.S. 304 Body is made of Wooden/ M.S. Duly Powder Coated/ S.S. 304 Imported Mini Pleat HEPA Filter of 0.3μ of an efficiency of 99.97% down to 0.3μ media is of glass fiber & made of pleats back & frown in a anodized Aluminum frame. Pre filter of dry fiber washable type with the frame of on all the sides. Confirm the international standards 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level is very low Vibration is also very low. Normal working fluorescent Light. Static pressure Manometer U. V. Light 1 x 30/15 watts. Front Door of Acrylic Sheet (Transparent) Or any non standard size Optional: Magnahelic Gauge in place of Static Pressure Manometer. Digital Manometer U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. Automatic Safety system for U.V. light. Automatic start system filtered Air & Normal light in Laminar Air Flow LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer Automatic motorised front door lifting arrangement Online transfer of data without any cable/wire Interference

“Optics Technology” Ductless Fume Hood basic offers variety of functionlities. Body is made of Wooden / M.S. Duly Powder Coated / S.S. 304. Eco friendly and cost effective. Mini pleat Hepa Filter of 0.3µ of an efficiency of 99.97% down to 0.3µ media is of glass fiber & made of pleates back & frow & packed in a anodized aluminum frame with carbon filter. Working table is covered with Chemical Resistant Granite. Front door is made of 6mm clear glass in Aluminium Frame duly Powder coated and connected with a counter weight balance through a nylon rope. The door will have the provision of vertical sliding facility. Internal Structure is coated with acid & fire resistance coating. Front door is made of 6mm clear toughened glass with easily sliding of up & down position. Exhaust blower of single phase Electric motor (1 H.P.) with 2500 RPM connected which is inbuilt in the hood. Ventilated base with storage cabinet of selection off drawer & doors. Light luminance of 140 lux with light lamp of anti corrosive. Power Supply: 220 V AC, Single Phase, 50 Hz. Optional: Base storage cabinet Air Flow Monitor (LCD Display). P.P. Sink with Swan Neck Water Tap Automatic motorized front door lifting arrangement. Scrubber System