TWO-STAGE VANE PUMP To improve the backing pressure and displacement at low pressure two stages are connected in series. ANTI-SUCKBACK SYSTEM If the Power Supply fails on stops, an anti-suck back device. Prevents air or oil the pump to be drawn back into the chamber being evacuated and operated by Solenoid coil. GAS BALLAST The gas ballast allows a quantity of air to be injected into the second stage of the pump during compression to reduce the partial pressure to the pumped gas below its saturated Vapour pressure and thus prevent condensation. The saturated vapour pressure of a gas is higher when it is hot and lower when it is cold. When gas ballasting is in use, there will be increase in ultimate pressure of the pump as well as the temperature. Power : 230V AC supply Optional: Moisture Trap Non Return Valve Vacuum Gauge Air Oil Mist Exhaust Filter

Quartz Double Distiller – with Replaceable Silica Heater and ripple Built-in Safety. “Optics Technology” unit consist of main boiler with a inbuilt heater enclosed in quartz glass tube with auto water lever adjuster and bottom outlet for cleaning waste discharged the whole unit is mounted on epoxy coated metal box stand with inbuilt power supply unit. Optional : Safety Control (Cut off Device)

“Optics Technology” Ductless Fume Hood basic offers variety of functionlities. Body is made of Wooden / M.S. Duly Powder Coated / S.S. 304. Eco friendly and cost effective. Mini pleat Hepa Filter of 0.3µ of an efficiency of 99.97% down to 0.3µ media is of glass fiber & made of pleates back & frow & packed in a anodized aluminum frame with carbon filter. Working table is covered with Chemical Resistant Granite. Front door is made of 6mm clear glass in Aluminium Frame duly Powder coated and connected with a counter weight balance through a nylon rope. The door will have the provision of vertical sliding facility. Internal Structure is coated with acid & fire resistance coating. Front door is made of 6mm clear toughened glass with easily sliding of up & down position. Exhaust blower of single phase Electric motor (1 H.P.) with 2500 RPM connected which is inbuilt in the hood. Ventilated base with storage cabinet of selection off drawer & doors. Light luminance of 140 lux with light lamp of anti corrosive. Power Supply: 220 V AC, Single Phase, 50 Hz. Optional: Base storage cabinet Air Flow Monitor (LCD Display). P.P. Sink with Swan Neck Water Tap Automatic motorized front door lifting arrangement. Scrubber System

“Optics Technology” Ductless Fume Hood basic offers variety of functionlities. Body is made of Wooden / M.S. Duly Powder Coated / S.S. 304. Eco friendly and cost effective. Mini pleat Hepa Filter of 0.3µ of an efficiency of 99.97% down to 0.3µ media is of glass fiber & made of pleates back & frow & packed in a anodized aluminum frame with carbon filter. Working table is covered with Chemical Resistant Granite. Front door is made of 6mm clear glass in Aluminium Frame duly Powder coated and connected with a counter weight balance through a nylon rope. The door will have the provision of vertical sliding facility. Internal Structure is coated with acid & fire resistance coating. Front door is made of 6mm clear toughened glass with easily sliding of up & down position. Exhaust blower of single phase Electric motor (1 H.P.) with 2500 RPM connected which is inbuilt in the hood. Ventilated base with storage cabinet of selection off drawer & doors. Light luminance of 140 lux with light lamp of anti corrosive. Power Supply: 220 V AC, Single Phase, 50 Hz. Optional: Base storage cabinet Air Flow Monitor (LCD Display). Touch Screen Model (Air Flow Touch Screen Display) P.P. Sink with Swan Neck Water Tap Automatic motorized front door lifting arrangement. Scrubber System

The instrument is used for accurately measure the mass of a substance. Easy to read Backlight LCD Display it provide User-selectable environmental filters and brightness settings. Specification : ➢ High Resolution, Quick Weighing ➢ Based on E.M.F.C. Technology ➢ Tare range upto max. Capacity ➢ Multiple Weighing Units ➢ Auto – Timing Calibration ➢ Percentage (%) Weighing ➢ Level Indicator, Adjustable fit ➢ Counting Weighing mode ➢ Units Conversion and data output ➢ 230 V AC Power supply

The instrument is used for accurately measure the mass of a substance. Easy to read Backlight LCD Display it provide User-selectable environmental filters and brightness settings. Specification : ➢ High Resolution, Quick Weighing ➢ Based on E.M.F.C. Technology ➢ Tare range upto max. Capacity ➢ Multiple Weighing Units ➢ Auto – Timing Calibration ➢ Percentage (%) Weighing ➢ Level Indicator, Adjustable fit ➢ Counting Weighing mode ➢ Units Conversion and data output ➢ 230 V AC Power supply

Max. Temp. 200ºC It has a speed regulator for varying speed of stirring Teflon coated stirrer paddle will be provided Speed control through Knob With Energy Regulator for temperature An energy regulator supplies power to the heating element a certain percentage of the time depending upon the dial setting Easy to clean Maintain. Speed up to 1200 RPM Electric supply : 220 – 240 V, 50 Hz single phase

“Optics Technology” Homogenizer are light weight & hand held design that can be easily operated by single hand with less strain during long period of operations. Working Principle: The sample circularly loop into a narrow space between the high speed and relative motion stator to shear and break the sample. E.g. tissue such as muscle, liver, breast etc. Can be completely homogenization is 10-30 seconds. Parameters: Type : Hand Held Homogenizer Power Supply : 230V/50/60HZ Power (Input/Output) : 110W Rotor Line Speed : 6.3-14m/sec Net Weight : 0.7kg Noise : 72dB(A) Speed Control Range : 8000-35000rpm (digital display) Capacity : 1-100ml

Silent Features: ➤ This mechanism provides Simultaneously Rotating and Tapping Motion to the Cylinders for packing the sample under test evenly and uniformly together. ➤ Complies with USP, IP specifications ➤ Extremely useful for pharmaceutical labs ➤ Microprocessor based, easy to use ➤ 20 x 4 line alphanumeric LCD display with backlit ➤ 16 Soft touch membrane type keys ➤ Independent programmable setups for User & USP mode with storage ➤ RS232 Printer attachment facility ➤ Automatically calculate result parameters like Tap Density, Initial Density, Compressibility Index and Hausner Ratio ➤ Automatically stores last Result ➤ Power Failure detection facility ➤ User friendly operation with menus & current status indicators. Technical Specifications: ➤ Tap Height : USP-I : 14mm ± 2mm, USP-II : 3mm ± 0.3mm ➤ Taps/Minute : USP-I : 300 ± 15, USP-II : 250 ± 15 ➤ No. of Tap Counts : 1 to 9999, (No. of Stations: 2) ➤ Type of Drive : Direct Drive with Stepper Motor ➤ Printer Accessories : Attachment of RS232 printer with Serial interface ➤ Electrical Supply : 230 V AC ± 10%, 50/60 Hz, 44VA