The instrument is designed for accurate estimation of disintegration time of tablets/capsules. It is assembled in painted sheet metal cabinet with chemical resistant epoxy coating, fitted with superior quality constant speed sturdy motor. The guide discs and strokes are confirming to Pharmacopoeia Standards. (Body is made of M.S. Duly Powder Coated / SS 304 Body). Specifications: Displacement : 55mm RPM : 30 Drive : 1/8 HP Heater : 125 watt. Power : 230 V AC Single Phase Optional: Digital Time Totalizer Water bath System Instead of Hot Plate with Thermostatics Temperature Controller Microprocessor Based PID Controller (Only with Water bath model).

Air Flow: Vertical With Working table of S. S. 304 Body is made of Wooden/ M.S. Duly Powder Coated/ S.S. 304 Imported Mini Pleat HEPA Filter of 0.3µ of an efficiency of 99.97% down to 0.3µ media is of glass fiber & made of pleats back & frown in a anodized Aluminum frame. Prefilter of dry fiber washable type with the frame of on all the sides Confirm the international standards 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level is very low Vibration is also very low Normal working fluorescent Light Static pressure Manometer U. V. Light 1 x 30/15 watts Front Door of Acrylic Sheet (Transparent) Gas cock Or any non standard size Optional: Magnahelic Gauge in place of Static Pressure Manometer. Digital Manometer U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. Automatic Safety system for U.V. light. Automatic start system filtered Air & Normal light in Laminar Air Flow LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer Automatic motorised front door lifting arrangement Online transfer of data without any cable/wire Interference MICROPROCESSOR BASED TOUCH SCREEN DISPLAY SYSTEM Display of velocity with lower and upper safe limits. Display of total run time of instrument & timer for U.V. lamp Control of U.V. light to prevent the operator from U.V. rays as and when required. Automatic Door sensors to switch off the U.V. light when door is opened. Display of message for life of HEPA filter, U.V. light etc.

Working table of S.S. 304 Body is made of Wooden/ M.S. Duly Powder Coated/ S.S. 304 Imported Mini Pleat HEPA Filter of 0.3μ of an efficiency of 99.97% down to 0.3μ media is of glass fiber & made of pleats back & frown in a anodized Aluminum frame. Pre filter of dry fiber washable type with the frame of on all the sides. Confirm the international standards 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level is very low Vibration is also very low. Normal working fluorescent Light. Static pressure Manometer U. V. Light 1 x 30/15 watts. Front Door of Acrylic Sheet (Transparent) Or any non standard size Optional: Magnahelic Gauge in place of Static Pressure Manometer. Digital Manometer U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. Automatic Safety system for U.V. light. Automatic start system filtered Air & Normal light in Laminar Air Flow LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer Automatic motorised front door lifting arrangement Online transfer of data without any cable/wire Interference

This instrument is used to check the density of powder. Can Hold 2 No. cylinders, capacity : 100 ml. Based on and tapping mechanism, User has to select the No. of stokes in the counter Three models are available as given below Meet USP Standards. BODY IS MADE OF MILD STEEL DULY POWDER COATED / S.S. 304

The tank has been designed to accommodate casted cubes and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each cube. Product Specification: Material : SS/MS Body Power Supply : 220V Temperature Accuracy : ±1°C Usage/Application : Curing of Concrete Block Working Temperature : 27°C Voltage : 220V Frequency : 50 Hz Phase : Single Size : 4x3x2 Feet (700Ltrs.) Note: Size are also customized The tank has been designed to accommodate cube moulds and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 27°C ± 1°C and expect for the 15 minutes after immersion of the freshly made specimens. As per comply IS 269 & IS 516 (Methods of tests for Strength of Concrete) after the period of 24 hours, specimens of Cubes, cylinders, beams etc. shall be marked for later identification, removed from the moulds and, unless required for 24 hours. Records of the daily max. & Min. temperature shall be kept both during the period of specimen remain on the site and in the laboratory.

The tank has been designed to accommodate casted cubes and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each cube. Product Specification: Material : SS/MS Body Power Supply : 220V Temperature Accuracy : ±1°C Usage/Application : Curing of Concrete Block Working Temperature : 27°C Voltage : 220V Frequency : 50 Hz Phase : Single Size : 4x3x2 Feet (700Ltrs.)

Cement Autoclave comes with great accuracy and is a cost-effective model for conductive accelerated soundness test of the cement. Double Walled with six glass wool insulation mounted on a sturdy supporting frame. The attached control unit is enclosed by a Microprocessor based PID controller, pressure gauge and spring-loaded safety valve of brass. Technical Specification: ➤ Material: SS/MS Body ➤Size: 150 x 500 mm ➤ Working Pressure 21 ± 1kg/cm2 at 215°C ➤ Tested on up to 2.5 times the normal working pressure Fast and reliable accurate results Equipped with wing nut locking system

Technical Specification: ➤ Material : SS/MS Body ➤Size : 150 x 500 mm ➤ Working Pressure 21 ± 1kg/cm2 at 215°C ➤ Tested on up to 2.5 times the normal working pressure ➤Fast and reliable accurate results ➤Equipped with wing nut locking system

Sterility testing is required to ensure viable contaminating microorganisms are not evident in a product. Unit is made of S.S. 316 with SS Valve. For excellent chemical resistance and can be fastly sterilized by flame, steam, and oven. We provide a fully leak Proof Platform. Light Weight to handle without Vacuum Pump and without Filter Paper.