TWO-STAGE VANE PUMP To improve the backing pressure and displacement at low pressure two stages are connected in series. ANTI-SUCKBACK SYSTEM If the Power Supply fails on stops, an anti-suck back device. Prevents air or oil the pump to be drawn back into the chamber being evacuated and operated by Solenoid coil. GAS BALLAST The gas ballast allows a quantity of air to be injected into the second stage of the pump during compression to reduce the partial pressure to the pumped gas below its saturated Vapour pressure and thus prevent condensation. The saturated vapour pressure of a gas is higher when it is hot and lower when it is cold. When gas ballasting is in use, there will be increase in ultimate pressure of the pump as well as the temperature. Power : 230V AC supply Optional: Moisture Trap Non Return Valve Vacuum Gauge Air Oil Mist Exhaust Filter

Applications include isolation and indentification of plant/human pathogens, work in virology, tissue culture, sterility testing and recombinant DNA research. This Biohazard Cabinet offers operator protection from low to moderate risk biological agents (or chemical carcinogens), while providing a sterile work environment for the procedure. The cabinet is kept under negative pressure with partial quantity of recirculated air exhausted through a HEPA filter. External exhaust from the laboratory is optional. The Biological Safety Cabinet is similar in performance and specification to the Vertical Series, described on reserse. The additional main features are as under:- Specially suited for Pathogenic work, chemical work, critical biological work involging virus and pathogens & for microbiology, biochemistry etc. Standard S.S. Perforated table. Imported Mini Pleat HEPA of 0.3 µ of an efficiency of 99.97% down to 0.3 micron Media is of glass fiber & made of pleats back & fro in an anodized aluminum frame (With Test Report). Integral powerful exhaust system. Built-in-positive Air Curtain effect to prevent inside air from going out and room air from entering in, providing total process and operator safety. Exhaust ducting to carry the air outside. Front sliding door, U.V. light, Manometer, Gas cock etc. Mini Pleat HEPA Filter in Exhaust. Virus Burn out Unit in Exhaust. FACE VELOCITY: A face velocity of 90±20 FPM is maintained. Optional: Magnahelic Gauge in place of Static Pressure Manometer. Digital Manometer U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer Gloves Port (Without Gloves) Automatic motorised front door lifting arrangement Online transfer of data without any cable/wire Interference MICROPROCESSOR BASED TOUCH SCREEN DISPLAY SYSTEM Display of velocity with lower and upper safe limits. Display of total run time of instrument & timer for U.V. lamp. Control of U.V. light to prevent the operator from U.V. rays as and when required. Automatic Door sensors to switch off the U.V. light when door is opened. Display of message for life of HEPA filter, U.V. light etc.

Triple Walled Working up to 22 PSI to 25 PSI, Working Temp. 121ºC to 134°C. The inner chamber is made of thick Stainless Steel 304, with the steam stock facility. The outer body is made of thick Stainless Steel 304 / M.S. Duly Powder-Coated body, chamber is absolutely Leak Proof Chamber. Fitted with Digital Temp. Controller cum Timer. It is provided with pressure gauge, pressure release valve, Pressure Stat, Safety Valve, With water Level indicator with cord, Plug, Pressure Control Switch, S.S. Lid, Safety Valve for jacket & Dead Weight With wing nut System, With Water Level cut-off device for safety of Heaters. Optional: Vacuum Breaker Valve Calibration Port Safety Alarm 21 CFR Software (Only with touch screen model) Automatic System OR Microprocessor Based Automatic Touch Screen Display system with Data Logging

Electrically heated, complete with stand single walled Aluminum Body/Stainless Steel 304 along with essential parts like pressure gauge, Safety valve etc.

Positive pressure modules are designed to provide a clean area within a small enclosure or cell. These pressure module adopts the same as Laminar Air Flow Principle. It generate positive pressure where the Room is totally Closed. It provides a source of Fresh Air in the Room.

(S.S. 316 BODY) Seal membrane by hand tightening locking wing nuts, optimal holder designed to minimizes resistance and maximizes flow rate. Applications: Use in line for filtering gases or liquids Use with pressure vessel for batch type operations

Inside chamber made of S. S. 304 Outside Mild Steel/S.S. 304 with Toughened Glass Door. It is provided with 1 or 2 No. of S.S. trays. Temp. Range Ambient Temp. +5°C to 130°C. Temp. Controlled by Microprocessor based PID controller. Vacuum Pressure indication by vacuum gauge. Optional: Digital Vacuum Gauge. Microprocessor Based Touch Screen Display System

Inside chamber made of S. S. 304 Outside Mild Steel/S.S. 304 with Toughened Glass Door. It is provided with 1 or 2 No. of S.S. trays. Temp. Range Ambient Temp. +5°C to 130°C. Temp. Controlled by microprocessor based PID controller. Vacuum Pressure indication by vacuum gauge. Optional: Digital Vacuum Gauge. Microprocessor Based Touch Screen Display System

An automatic Ice machine for your hygienic Ice flakes requirement in research laboratories, chemicals, pharmaceuticals, medical, biotechnological and hotel industries. The machine utilizes running tap water and converts it in the form of ice flakes continuously. It is a compact, self contained unit, covering less floor area & easily installable. Constructions: Ice flaker is housed in styled Stainless Steel 304 body with stainless steel made bin with no chances of corrosion. Ice crusher used is GERMAN CRUSHER made of S.S. to give life long performance. Water is introduced into crusher assembly through a precision float valve. The inflow of water is smoothly controlled by this float valve for maintaining a required level of water irrespective of variation in pressure at the water input line with automatic cut off in case of Low water / No water supply. Ice flakes are collected into a well-insulated/ (PUF) stainless steel container. So it stays for longer time. The removal of flakes is easily possible through the stainless steel Top door which can be opened with handle while removing the ice. Moreover the equipment fitted with an ICE LEVEL CONTROLLER which will put off the system in case ice gets accumulated in the container more than the required level. Hence, there is no need of an operator being on the machine all the time. The ice controller is provided with a drain line for occasional cleaning of the container.