It consist of an inbuilt prefilter & very high exchanging capacity non-corrosive CATION & ANION Resin, columns prefilled with imported Resins for efficient results having treated water parameters. Fitted with a sturdy PVC multi control valve & can be connected direct to water taps. Fitted with analog / digital conductivity meter. Supplied with one plastic chemical proof regeneration tank & the complete unit is housed in a painted M.S. trolly for easy mobility. Features: • Digital Display • Non corrosive Regeneration Tank •In Built Pre filter High capacity Cation and Anion exchange resins. Upflow treatment. Easily portable - metal stand and trolley Can be connected direct to Water Tap. Simple Periodic regeneration - negligible operating costs. Digital model is fitted with digital conductivity meter. Treated water will have the conductivity less than 10 ms/cm and pH of 7.5-9 • Available in Double Bed, Four bed and Mixed bed models Capacity: 50 Ltrs / Hr. 70 Ltrs / Hr. 100 Ltrs / Hr. 200 Ltrs / Hr. 500 Ltrs / Hr.

The apparatus is designed to determine the abrasion rate and impact hardness of tablets. One/Two transparent acrylic drums rotated by superior quality constant speed sturdy motor, mounted in painted sheet metal cabinet with chemical resistant epoxy coating. (Body is made of M.S. Duly Powder Coated / S.S. 304). Special Features: Realistic abrasion rate is obtained by pre-set revolutions through a pilot lamp as compared to time setting, where voltage fluctuation may change number of revolution in pre-set time. Specification: Drum Diameter : 285mm Tablet Fall Distance : 140mm Drive : 1/8 HP Power : 230 V AC Single Phase

Cement Autoclave comes with great accuracy and is a cost-effective model for conductive accelerated soundness test of the cement. Double Walled with six glass wool insulation mounted on a sturdy supporting frame. The attached control unit is enclosed by a Microprocessor based PID controller, pressure gauge and spring-loaded safety valve of brass. Technical Specification: ➤ Material: SS/MS Body ➤Size: 150 x 500 mm ➤ Working Pressure 21 ± 1kg/cm2 at 215°C ➤ Tested on up to 2.5 times the normal working pressure Fast and reliable accurate results Equipped with wing nut locking system

Sterility testing is required to ensure viable contaminating microorganisms are not evident in a product. Unit is made of S.S. 316 with SS Valve. For excellent chemical resistance and can be fastly sterilized by flame, steam, and oven. We provide a fully leak Proof Platform. Light Weight to handle without Vacuum Pump and without Filter Paper.

This machine is for determining the resistance to wear off small size coarse aggregates and crushed rock. The machine consists of a hollow cylinder, mounted on a sturdy frame on ball bearings. A detachable shelf which extends throughout the inside length of the drum catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated by an electric motor through a heavy duty reduction gear. Note : Drums are available in different sizes.

( MS Body Duly Powder Coated ) Optional : Digital Timer

(WITH MOTOR & MECHANICAL TIMER) Produces upward and downward movement but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. Optional: Digital Timer

DETAILS Display Resolution 0.1μS/cm in lowest range CONDUCTIVITY 32 Digit bright red LED display 0.1ppm in lowest range TDS Accuracy ±0.5% FS± 1 digit Ranges 0 to 200μS/cm 0 to 200ppm 0 to 2mS/cm 0 to 2ppt O to 20mS/cm 0 to 200mS/cm 0 to 1000mS/cm 0 to 20ppt 0 to 200ppt 0 to 1000ppt

Ranges 0 to 0.2 mS/cm 0 to 2 mS/cm 0 to 20 mS/cm 0 to 200 mS/cm 0 to 1000 mS/cm Accuracy ±1% FS± 1Digit (0 to 200 μS/cm) (0 to 2000 μS/cm) (0 to 20000 μS/cm) (0 to 200000 μS/cm) (0 to 1000000 μS/cm)