“Optics Technology” manually operated Hydraulic Pallet Press for fast and easy preparation of both solid and highly permeable pellet. Working: The pressure pallet and die arm are located in inner cylinder sample is placed in between polished pressure plates. A Hydraulic Press is then used to apply necessary pressure to the sample via die. Cylinder Type : Single acting, up stroking Weight : 35 kgs Pump Type : Hand Operated Safety Feature : Pressure relief valve to safeguard against applying over-pressure Model Size OT-MHPP-276/10 10mm KBr Die Set (Stainless Steel) OT-MHPP-276/13 13mm KBr Die Set (Stainless Steel)

CONDUCTIVITY METER DIGITAL (Pocket Type) Single point manual calibration

In bomb of bomb calorimeter gas filing is done by this device (To avoid manually filling of oxygen in the bomb). The system is electrically controlled and stops automatically once the gas is filled at pre set pressure value.

Accuracy : ± 3% FS, ± 1Digit Response Time : Less than 10 seconds Display : 3.5 Digit 7-Segment LED Detector : Photodiode Sample System : 30 mm Clear Glass Test Tubes Accessories : Test tube Set of 5, Operation Manual Light Source : 6V, 0.3Amp Tungsten Lamp

The test is used for determining liquid absorptiveness or resilience of treated and untreated paper, board, fabrics and other sheet materials. The test consists of a test apparatus, its 10 kg roller and blotting paper. The roller method is recommended to insure better consistency and reliability that can be obtained by manual blotting or rubbing the specimen. Specification: Standard test area : 100 cm2 Metal roller : 10 kg + 0.5 kg Dimensions: Depth : 150 mm Height : 275 mm Width : 330 mm Features: ➤ One Universal model to test paper, Board and water proof board. ➤ Three graduations of height 10, 25 and 100 mm as specified in TAPPI 441 for Paper, Corrugated Board and Waterproof Board respectively. ➤ Adjustable clamp pressure mechanism for necessary required clamping pressure to prevent water leakage during clamping. ➤ Aluminium Block and steel Roller for rust proof and longer life.

Compact & Economical Single push button operation Manual clamping Direct Display of Readings Digitally Range from 0 - 35 Kg.

Drop tester manual / electrically operated auto model for determination of transport worthiness of packed containers. Features • Flap Opening Type and Manual height adjustment and locking system It is highly consistent equipment for findings repeatable and accurate results. • The testing instruments supplied with conformance certificate. • Drop Height adjustable clamp Strong base plate with rugged structure Specification Max. Drop height - 1800 mm & minimum drop height 700 MM. Interval =1 MM Maximum Box Weight at: 50 Kgs.

This unit is very necessary for the process of capping bottles & Jars. An easy process is used, to fulfill this requirement, wherein the cap is manually placed and aligned on the bottle mouth and the capping unit does the work of providing the required pre-set torque, needed to rigidly tighten the cap. Features: Industrial approved design Easy to operate

➤ Easy location of plastic container underneath the heating pad ➤ Effortless compression spring pressing device/ lever during the sealing operation ➤ Easily operate sealing pad height adjustments for different sizes of plastic containers ➤ Thermostat (Temp. control) to adjust according to the thickness of plastic cap/roll