TWO-STAGE VANE PUMP To improve the backing pressure and displacement at low pressure two stages are connected in series. ANTI-SUCKBACK SYSTEM If the Power Supply fails on stops, an anti-suck back device. Prevents air or oil the pump to be drawn back into the chamber being evacuated and operated by Solenoid coil. GAS BALLAST The gas ballast allows a quantity of air to be injected into the second stage of the pump during compression to reduce the partial pressure to the pumped gas below its saturated Vapour pressure and thus prevent condensation. The saturated vapour pressure of a gas is higher when it is hot and lower when it is cold. When gas ballasting is in use, there will be increase in ultimate pressure of the pump as well as the temperature. Power : 230V AC supply Optional: Moisture Trap Non Return Valve Vacuum Gauge Air Oil Mist Exhaust Filter

(DOUBLE WALLED) Inner S.S. 304 and Outer M.S. Duly Powder Coated / S.S. 304 Gap between the walls is filled with special PUF Insulation. Temp. & Humidity is controlled by Digital Temp. & Humidity Controller and Digital volt meter. Atmospheric conditions are created within the chamber. Humidity is created in a S.S. Water Reservoir fitted at the back to provide 40% to 95% ± 3% RH Humidity. Complete with Cord & Pulg to work on 220 Volts A.C. Optional: Microprocessor based Temp. & Humidity Controller Microprocessor based Touch Screen Display System 21 CFR Software (For Non Editable Data)

Double wall construction, all the electrical and optional accessories inside the chamber will be in between the first and second wall. Interiors acid resistant material coated with fire proof epoxy paint. Working table is covered with Granite Front door is made of 6mm clear Toughened glass. Counter weight balance Front Door. Vertical sliding facility & the front door can be stopped at any point. Exhaust blower consists of single phase motor connected with a PVC Exhaust Ducting. Standard ducting upto 6’ is provided. Optional: Base storage cabinet. P.P. Sink with Swan Neck Water Tap Air flow monitor (LCD Display). Automatic motorised front door lifting arrangement. Touch Screen Display with Air Flow Monitor. Scrubber System

Most suitable for conducting various experiments on a variety of seeds under different conditions of temperature and humidity. Atmospheric conditions are created within the chamber. Double walled unit Inner chamber made of Stainless Steel and outer chamber of M.S. sheet duly painted & controlled by Digital Temperature controller-cum-Humidity Controller. Humidity is created in a S.S. water reservoir fitted at the bottom to provide RH Humidity Supplied complete with 12-14 adjustable wiremesh trays with Exterior lighting arrangement on both sides.

Most suitable for conducting various experiments on a variety of seeds under different conditions of temperature and humidity. Atmospheric conditions are created within the chamber. Double walled unit Inner chamber made of Stainless Steel and outer chamber of M.S. sheet duly painted & controlled by Digital Temperature controller-cum-Humidity Controller. Humidity is created in a S.S. water reservoir fitted at the bottom to provide RH Humidity Supplied complete with 12-14 adjustable wiremesh trays with Exterior lighting arrangement on both sides. Specification Temperature range : 5°C to 50°C Temperature Accuracy : ± 1°C RH Humidity : 90% to 95% ± 3% Power Supply : 220/230 volts A.C. Supply. Inside Chamber Size: (W x D x H) 600 x 600 x 900 mm (24“ x 24” x 36")

Incinerator is precisely designed for quick and safe disposal of waste materials specially for pharmacy colleges, small R&D labs, small nursing homes, veterinary colleges without causing any harm to the environment in a very eco-friendly process. CONSTRUCTION : Body is made of mild steel duly powder coated. Heating element is made of Kanthal wire. Ducting unit is also provided with this instrument, with water circulation in the lower chamber and burning portion in the upper chamber. Rating of heater : Lower chamber 12 KW, Temperature range 850ºC – 900ºC Upper chamber 4.5 KW, Temperature range 1050ºC. Available in different models as per specification.

Technical Specifications: ➤ Double Walled ➤ Inner S.S. 304 Outer M.S. Duly Powder Coated / Stainless Steel ➤ Low Maintenance, Sturdy Construction. ➤ Light arrangement on both sides with Day & Night Timer ➤ With photoperiodic Timer ➤ Gap between the walls is filled with special PUF Insulation. ➤ CFC Free Compressor of “Kirloskar” / Tecumseh ➤ Temp. & Humidity is controlled by Digital Temp. & Humidity Controller. ➤ Atmospheric conditions are created within the chamber. ➤ Temp. from 5°C to 50°C ± 1°C & humidity is created in a S.S. water ➤ Reservoir fitted at the back to provide Atmospheric Humidity upto 95% ± 3% RH. ➤ Supplied by 3 no. of wire mesh trays for uniform temp. & humidity. ➤Provided Door with Key Lock to ensure sample security. ➤ Easy to clean Interior Stainless Steel. ➤ Complete with Cord & Pulg to work on 220 Volts A.C.

Hydrothermal Reactor mainly made up of two parts; outer high-quality Stainless Steel jacket and inner Teflon liner or Teflon chamber. In the Teflon-lined autoclave, the reaction is carried out at maximum 240°C while the safe temperature is 200°C. Reactors and Autoclaves containing liquid media are subjected to 2000 PSI pressure and temperature less than 200°C and after that two routes can be followed for the formation of ferrites by Hydrothermal reactions. There are significant advantages of Hydrothermal synthesis method over others. Hydrothermal synthesis can generate nanomaterials which are not stable at elevated temperatures. Nanomaterials with high vapor pressures can be produced by the Hydrothermal method with minimum loss of materials.

The vacuum pump functions by removing the molecules of air and other gases from the vacuum chamber. It is available in single-stage & Double Stage with oil & belt Motor System. It is designed for accurate measurement of melting points and for checking the melting range of the solid samples & boiling points also.