Laminar Air flow with hanging construction can be used everywhere, where is necessary not only to do the working process in dust-free spaces but also fully to eliminate vibration caused by laminar flow cabinets. The body is made of wooden / M.S. Duly Powder Coated / S.S. Body. Imported Mini Pleat HEPA of 0.3µ of efficiency of 99.97% down to 0.3µ media is of glass fiber & made of Pleats. Pre-filter of dry fiber washable type with the frame on all sides. Confirm the international standard 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level & Vibration is very low. Normal working fluorescent Light. Static pressure Manometer. U. V. Light 1 x 30/15 watts.

Air Flow: Vertical With Working table of S. S. 304 Body is made of Wooden/ M.S. Duly Powder Coated/ S.S. 304 Imported Mini Pleat HEPA Filter of 0.3µ of an efficiency of 99.97% down to 0.3µ media is of glass fiber & made of pleats back & frown in a anodized Aluminum frame. Prefilter of dry fiber washable type with the frame of on all the sides Confirm the international standards 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level is very low Vibration is also very low Normal working fluorescent Light Static pressure Manometer U. V. Light 1 x 30/15 watts Front Door of Acrylic Sheet (Transparent) Gas cock Or any non standard size Optional: Magnahelic Gauge in place of Static Pressure Manometer. Digital Manometer U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. Automatic Safety system for U.V. light. Automatic start system filtered Air & Normal light in Laminar Air Flow LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer Automatic motorised front door lifting arrangement Online transfer of data without any cable/wire Interference MICROPROCESSOR BASED TOUCH SCREEN DISPLAY SYSTEM Display of velocity with lower and upper safe limits. Display of total run time of instrument & timer for U.V. lamp Control of U.V. light to prevent the operator from U.V. rays as and when required. Automatic Door sensors to switch off the U.V. light when door is opened. Display of message for life of HEPA filter, U.V. light etc.

A medical grade Air Purifier which has HEPA filter, High grade prefilter absorbs odors and toxic gases. HEPA filter removes 99.97% of airborne particles, including mold, spores, and tobacco smoke. UV lamp is effective in eliminating bacteria and viruses smaller then 0.3 microns. Lab tests have shown that 90% of the bacteria and viruses are eliminated in the first pass.

Working table of S.S. 304 Body is made of Wooden/ M.S. Duly Powder Coated/ S.S. 304 Imported Mini Pleat HEPA Filter of 0.3μ of an efficiency of 99.97% down to 0.3μ media is of glass fiber & made of pleats back & frown in a anodized Aluminum frame. Pre filter of dry fiber washable type with the frame of on all the sides. Confirm the international standards 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level is very low Vibration is also very low. Normal working fluorescent Light. Static pressure Manometer U. V. Light 1 x 30/15 watts. Front Door of Acrylic Sheet (Transparent) Or any non standard size Optional: Magnahelic Gauge in place of Static Pressure Manometer. Digital Manometer U.V. Resistant Poly Carbonate sheet in place of Acrylic Sheet. Automatic Safety system for U.V. light. Automatic start system filtered Air & Normal light in Laminar Air Flow LCD display with soft touch switches for Motor, U.V. Light, F.V. Light & U.V. Timer Automatic motorised front door lifting arrangement Online transfer of data without any cable/wire Interference

The body is made of wooden / M.S. Duly Powder Coated / S.S. Body. With all accessories which are: Working table of S.S. 304 Mini Pleat HEPA of 0.3 µ of an efficiency of 99.97% down to 0.3 micron. Media is of glass fiber & made of pleats back & fro in an anodized aluminum frame (With Test Report) Pre filter of dry fiber washable type with the frame of on all the sides Confirm the international standard 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically & Dynamically Balanced motor blower Assembly (Heavy Duty) Very Less Electrical Load Energy Efficient Blowers Velocity at the output of HEPA is 90 ± 20 FPM Noise level is very low Vibration is also very low. Normal working fluorescent Light Static pressure Manometer U. V. Light Front & Side Door of Acrylic Sheet (Transparent) Gas cock

The body is made of wooden / M.S. Duly Powder Coated / S.S. Body. With all accessories which are: Working table of S.S. 304 Mini Pleat HEPA of 0.3 µ of an efficiency of 99.97% down to 0.3 micron. Media is of glass fiber & made of pleats back & fro in an anodized aluminum frame (With Test Report) Pre filter of dry fiber washable type with the frame of on all the sides Confirm the international standard 209 E. Class 100 (As per USFED-STD. 209E) ISO Class 5 (As per ISO-14644.1), IEC 61010-1:2010, ISO 29463-5:2022 Statically Balanced motor blower Assembly (Heavy Duty) Velocity at the output of HEPA is 90 ± 20 FPM Noise level is very low Vibration is also very low. Normal working fluorescent Light Static pressure Manometer U. V. Light Front & Side Door of Acrylic Sheet (Transparent) Gas cock

Rapid Sterilization, saves time. Ideal for use in Laminar Flow Workstations, Tuberculosis Laboratories Safe and easy to use with digital temperature controller.

These are overhead clean air modules mounted with Stainless steel frame on the ground. Units can be built with / without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling / Dispensing of Raw Material, Basic Compounds, Active Compounds. It works on the principal of Laminar Air Flow with HEPA Filters & Pre-Filters. This will act as a CLASS 100 Room. Protection of the personnel in the cabinet from the processed substances by vertical flow with Reverse Flow of clean air protection of the raw and intermediate products to be processed. Protection of the room where the cabinet is built up and environment from highly active substance which otherwise would disperse in the room and escape in the atmosphere unfiltered. Safe collection and deposition of substance released during work. Features: • M.S Powder Coated / Stainless Steel 304 Body • Hepa Filter (0.3 Micron) • Fine Filter (5 micron) • Pre-Filter (10 micron) at Arrestance 90% • Motor Blower Assembly • U.V. Light • Fluorescent Lamp Operating Switch • Static Pressure Manometer • Stainless Steel Standing Base • High quality HEPA filter provides protection for the product (filtration • efficiency of more than 99.97% at 0.3 micron). • Ultra-quiet noise level of not more than 65 dBA. • Durable and easy to clean stainless steel body. • Work area properly illuminated by diffused glare free fluorescent light. PVC Flexible Curtains on all the three sides. Specifications: Air Velocity : 90 ± 20 FPM (Average) Filtration Elements : Main Filters - HEPA Filter Prefilter : Washable non-woven polyester fibers. Light Intensity : 800-1000 Lux Power Supply : 220V Single Phase, 50 Hz. Model No. Working Size W x D x H OT-SB-215-MS/SS-A 2' X 2' X 6' OT-SB-215-MS/SS-B 3' X 2' X 6' OT-SB-215-MS/SS-C 3' X 3' X 6' OT-SB-215-MS/SS-D 4' X 2' X 6' OT-SB-215-MS/SS-E 4' X 3' X 6' OT-SB-215-MS/SS-G 6' X 4' X 6' OT-SB-215-MS/SS-H 6' X 6' X 6' OT-SB-215-MS/SS-I 8' X 4' X 6' OT-SB-215-MS/SS-J 8' X 6' X 6' OT-SB-215-MS/SS-K 8' X 8' X 6'

( Stainless Steel SS 304 with HEPA Filter ) These specially designed cabinets provide a wash of sterile filtered, clean air through Imported Mini Pleat HEPA Filters having an efficiency of 99.97% down to 0.3 micron particle size. This cabinet protects dust and other particulates on clean room garments or other materials. For use in the change Room for garment storage & inside the clean room for storage of materials. Self standing cabinet provides down flow clean air to clean room garments. Features: Wooden / M.S. Duly Powder Coated / Stainless Steel 304 Body. Can be designed in Horizontal air flow system also. “All visible exposed surfaces white laminated, giving high impact resistance with smart clean appearance.” Large interior capacity for handling upto 20 garments at a time. Special provision for wire mesh shelves (optional) for component storage. Low power consumption suitable for operation on single phase supply. Any non standard size can be made on order. Applications: Pharmaceuticals Industries, R & D Laboratories, Hospitals Electronic Components and Semiconductor Industries, Photographic Laboratories, Optical Instruments Industries. Model No. Working Size L x B x H OT-SGS-216-W/MS/SS-A 2' x 1.5' x 3.0' OT-SGS-216-W/MS/SS-B 2' x 2.0' x 3.0' OT-SGS-216-W/MS/SS-C 3' x 1.5' x 4.5' OT-SGS-216-W/MS/SS-D 3' x 2.0' x 4.5' ' OT-SGS-216-W/MS/SS-E 4' x 1.5' x 4.5 OT-SGS-216-W/MS/SS-F 4' x 2.0' x 4.5' Optional: Magnehelic Gauge