VERNIER CALIPER (DIGITAL)

Drop tester manual / electrically operated auto model for determination of transport worthiness of packed containers. Features • Flap Opening Type and Manual height adjustment and locking system It is highly consistent equipment for findings repeatable and accurate results. • The testing instruments supplied with conformance certificate. • Drop Height adjustable clamp Strong base plate with rugged structure Specification Max. Drop height - 1800 mm & minimum drop height 700 MM. Interval =1 MM Maximum Box Weight at: 50 Kgs.

These viscometers are designed for viscosity tests of petroleum Products. They confirm to requirements of IP 70. Available models: Redwood suitable for liquids having redwood flow between 20 to 2000 seconds. Redwood suitable for liquids having redwood flow exceed 2000 seconds.

The tank has been designed to accommodate casted cubes and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each cube. Product Specification: Material : SS/MS Body Power Supply : 220V Temperature Accuracy : ±1°C Usage/Application : Curing of Concrete Block Working Temperature : 27°C Voltage : 220V Frequency : 50 Hz Phase : Single Size : 4x3x2 Feet (700Ltrs.) Note: Size are also customized The tank has been designed to accommodate cube moulds and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 27°C ± 1°C and expect for the 15 minutes after immersion of the freshly made specimens. As per comply IS 269 & IS 516 (Methods of tests for Strength of Concrete) after the period of 24 hours, specimens of Cubes, cylinders, beams etc. shall be marked for later identification, removed from the moulds and, unless required for 24 hours. Records of the daily max. & Min. temperature shall be kept both during the period of specimen remain on the site and in the laboratory.

It consist of an inbuilt prefilter & very high exchanging capacity non-corrosive CATION & ANION Resin, columns prefilled with imported Resins for efficient results having treated water parameters. Fitted with a sturdy PVC multi control valve & can be connected direct to water taps. Fitted with analog / digital conductivity meter. Supplied with one plastic chemical proof regeneration tank & the complete unit is housed in a painted M.S. trolly for easy mobility. Features: • Digital Display • Non corrosive Regeneration Tank •In Built Pre filter High capacity Cation and Anion exchange resins. Upflow treatment. Easily portable - metal stand and trolley Can be connected direct to Water Tap. Simple Periodic regeneration - negligible operating costs. Digital model is fitted with digital conductivity meter. Treated water will have the conductivity less than 10 ms/cm and pH of 7.5-9 • Available in Double Bed, Four bed and Mixed bed models Capacity: 50 Ltrs / Hr. 70 Ltrs / Hr. 100 Ltrs / Hr. 200 Ltrs / Hr. 500 Ltrs / Hr.

Specifications: Filtration assembly consisting of S.S. Filter Holder Suitable for filter dia 47 mm. Borosil Glass filtration flask capacity (1Ltr.), Vacuum Pipe & Oil Free Vacuum pump Without filter paper

Fitted with D.C. MOTOR But to work on 220 Volts A.C with Variable Speed from 20 R.P.M to 100 R.P.M approx. Jar Test Apparatus allows efficient and economical flocculation matter and collides in general and also has been specially designed for use in water treatments to correctly estimate the dosing of alum and such other coagulants for treatment of Water sewage and floc formation test in Water Treatment plants.

(MICROPROCESSOR BASED) Condenser Temp. (-) 40 °C / (-) 70 °C or better (at ambient temp. of 20 °C) PUF INSULATED, CFC Free Compressor, Drying Manifold (S.S 304) ½” and ¾”. Direct Drive Vacuum Pump 100Ltrs Minimum capacity, continuous display Temp. Indicator (LED Display), Digital Type Pirani Gauge, Housed in a Super Structure frame with wheel based.

(LAB MODEL) Condenser Temp. (-) 40 °C / (-) 70 °C or better (at ambient temp. of 20°C ) PUF INSULATED, CFC Free Compressor, Drying Manifold (S.S 304) ½” and ¾”. Direct Drive Vacuum Pump 100 Ltrs. Minimum capacity, continuous display Temp. Indicator (LED Display), Digital Type Pirani Gauge, Housed in a Super Structure frame with wheel based. Optional: Digital Vacuum Indicator Microprocessor based LCD display system for vacuum and temperature