STOPWATCH ANALOGUE

Simple touch switch operation for start, pause and entering the No. of strokes: LCD display of balance stroke left and total No. of strokes entered along with date and time, facility for intermittent stop and resume function.

TWO-STAGE VANE PUMP To improve the backing pressure and displacement at low pressure two stages are connected in series. ANTI-SUCKBACK SYSTEM If the Power Supply fails on stops, an anti-suck back device. Prevents air or oil the pump to be drawn back into the chamber being evacuated and operated by Solenoid coil. GAS BALLAST The gas ballast allows a quantity of air to be injected into the second stage of the pump during compression to reduce the partial pressure to the pumped gas below its saturated Vapour pressure and thus prevent condensation. The saturated vapour pressure of a gas is higher when it is hot and lower when it is cold. When gas ballasting is in use, there will be increase in ultimate pressure of the pump as well as the temperature. Power : 230V AC supply Optional: Moisture Trap Non Return Valve Vacuum Gauge Air Oil Mist Exhaust Filter

(DOUBLE WALLED) Inner S.S. 304 and Outer M.S. Duly Powder Coated / S.S. 304 Gap between the walls is filled with special PUF Insulation. Temp. & Humidity is controlled by Digital Temp. & Humidity Controller and Digital Volt Meter. Temp. from 5ºC to 60ºC ± 1ºC & humidity is created in a S.S. water Reservoir fitted at the back to provide Atmospheric Humidity upto 95%±3% RH. Optional : Microprocessor based Temp. & Humidity Controller Microprocessor based Touch Screen Display System 21 CFR Software (For Non Editable Data)

Double wall construction, all the electrical and optional accessories inside the chamber will be in between the first and second wall. Interiors acid resistant material coated with fire proof epoxy paint. Working table is covered with Granite Front door is made of 6mm clear Toughened glass. Counter weight balance Front Door. Vertical sliding facility & the front door can be stopped at any point. Exhaust blower consists of single phase motor connected with a PVC Exhaust Ducting. Standard ducting upto 6’ is provided. Optional: Base storage cabinet. P.P. Sink with Swan Neck Water Tap Air flow monitor (LCD Display). Automatic motorised front door lifting arrangement. Touch Screen Display with Air Flow Monitor. Scrubber System

Laboratory fume hoods are one of the most important components used to protect laboratory personnel from exposure to hazardous chemicals and agents used in the laboratory. Cabinet is made of : Wooden Body / M.S. Duly Powder Coated / Stainless Steel (304). Interiors acid resistant material coated with fire proof epoxy paint & further fixed on storage cabinet. Working table is covered with Granite Front door is made of 6mm clear Toughened glass. Counter weight balance Front Door. Vertical sliding facility & the front door can be stopped at any point. Exhaust blower consists of single phase motor connected with a PVC Exhaust Ducting. Standard ducting upto 6’ is provided. OR ANY NON STANDARD SIZE. Optional: Base Storage Cabinet P.P. Sink with Swan Neck Water Tap Air flow monitor (LCD Display) Automatic Motorized front door lifting arrangement Touch Screen Display with Air Flow Monitor Scrubber System

Beep alarm with chime and snooze 30 second correction for synchronization 12/24 hour display for user option. Maximum counting 23 hours 59 minutes 59 seconds

Double wall construction with inner Chamber Stainless Steel (S.S. 304) & Outer Body M.S. duly powder coated / Stainless Steel 304 Mounting One above the other with individual control box in the sides. Independent Doors. Independent controlling of temperature by 2 nos. microprocessor based PID controller. Removable SS wire mesh trays. The inner chamber is properly insulated with Glass Wool to prevent thermal losses. With Air Circulating Fan. OR ANY NON STANDARD SIZE Optional : 2 Nos. special Heavy-Duty Air Circulating fan system for continous Non-stop working 2 Nos. Microprocessor based Touch Screen with Pen Drive for data logging, Printing through PC communication & saving of data in PC Online transfer of data without any Cable/Wire interference 21 CFR Software (For Non Editable Data)

In bomb of bomb calorimeter gas filing is done by this device (To avoid manually filling of oxygen in the bomb). The system is electrically controlled and stops automatically once the gas is filled at pre set pressure value.