Disposal Machine is used to destroy soiled Sanitary Napkins both scientifically and hygienically. The Unit is Easy to operate & maintain and can work automatically on preset cycle every day. Optics Technology Sanitary Napkin Disposal Machine is lightweight and can be fixed on the wall with easy installation for the convenient use in the Toilets. The ash is collected in a tray located at the bottom of the Incinerator. Optics Technology Sanitary Napkin Disposal Machine is having and emission outlet outside the room for the fumes developed during the incineration. The Machine can also be installed inside the room with SMOKE REMOVAL UNIT (Optional) with absolute zero emission. Low Power Consumption and can work on Inverter.

A simple significance device that permits the timed flow of a known level of liquid passing through an orifice located at the bottom. The conditions in a simple flow cup are rarely ideal for making true measurements of viscosity. It is important when using a Ford Cup and when retesting liquids that the temperature of the cup and the liquid is maintained, as ambient temperature makes a significant difference to viscosity and thus flow rate. Optional: Digital Stop Watch

“Optics Technology” manually operated Hydraulic Pallet Press for fast and easy preparation of both solid and highly permeable pellet. Working: The pressure pallet and die arm are located in inner cylinder sample is placed in between polished pressure plates. A Hydraulic Press is then used to apply necessary pressure to the sample via die. Cylinder Type : Single acting, up stroking Weight : 35 kgs Pump Type : Hand Operated Safety Feature : Pressure relief valve to safeguard against applying over-pressure Model Size OT-MHPP-276/10 10mm KBr Die Set (Stainless Steel) OT-MHPP-276/13 13mm KBr Die Set (Stainless Steel)

The tank has been designed to accommodate casted cubes and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each cube. Product Specification: Material : SS/MS Body Power Supply : 220V Temperature Accuracy : ±1°C Usage/Application : Curing of Concrete Block Working Temperature : 27°C Voltage : 220V Frequency : 50 Hz Phase : Single Size : 4x3x2 Feet (700Ltrs.) Note: Size are also customized The tank has been designed to accommodate cube moulds and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 27°C ± 1°C and expect for the 15 minutes after immersion of the freshly made specimens. As per comply IS 269 & IS 516 (Methods of tests for Strength of Concrete) after the period of 24 hours, specimens of Cubes, cylinders, beams etc. shall be marked for later identification, removed from the moulds and, unless required for 24 hours. Records of the daily max. & Min. temperature shall be kept both during the period of specimen remain on the site and in the laboratory.