TWO-STAGE VANE PUMP To improve the backing pressure and displacement at low pressure two stages are connected in series. ANTI-SUCKBACK SYSTEM If the Power Supply fails on stops, an anti-suck back device. Prevents air or oil the pump to be drawn back into the chamber being evacuated and operated by Solenoid coil. GAS BALLAST The gas ballast allows a quantity of air to be injected into the second stage of the pump during compression to reduce the partial pressure to the pumped gas below its saturated Vapour pressure and thus prevent condensation. The saturated vapour pressure of a gas is higher when it is hot and lower when it is cold. When gas ballasting is in use, there will be increase in ultimate pressure of the pump as well as the temperature. Power : 230V AC supply Optional: Moisture Trap Non Return Valve Vacuum Gauge Air Oil Mist Exhaust Filter

(MICROPROCESSOR BASED) Condenser Temp. (-) 40 °C / (-) 70 °C or better (at ambient temp. of 20 °C) PUF INSULATED, CFC Free Compressor, Drying Manifold (S.S 304) ½” and ¾”. Direct Drive Vacuum Pump 100Ltrs Minimum capacity, continuous display Temp. Indicator (LED Display), Digital Type Pirani Gauge, Housed in a Super Structure frame with wheel based.

(LAB MODEL) Condenser Temp. (-) 40 °C / (-) 70 °C or better (at ambient temp. of 20°C ) PUF INSULATED, CFC Free Compressor, Drying Manifold (S.S 304) ½” and ¾”. Direct Drive Vacuum Pump 100 Ltrs. Minimum capacity, continuous display Temp. Indicator (LED Display), Digital Type Pirani Gauge, Housed in a Super Structure frame with wheel based. Optional: Digital Vacuum Indicator Microprocessor based LCD display system for vacuum and temperature

Microprocessor based Touch screen display system with special features Automatic System With features like SETTING Sterilization Temp. Soak Time Purge On / Off set point Exhaust Set Point High Alarm Set Point ETC. Digital Pressure Indication with respect to temperature. Touch Screen (for Data Logging through PEN DRIVE) Pen Drive for saving of data for printing through PC communication Graphical presentation of Pressure with respect to Temperature Error indications (Both audible and visible) for Low water Level, Sensor Failure and High Temperature Cross Limit Optional: Vacuum Breaker Valve Calibration Port Specially designed Lid locking system to make sure lid is locked properly Printing system with thermal printer 21 CFR Software

(Direct Reading of CALORIFIC VALVE with Printer) BOMB IS MADE OF SS 316 Temp. Accuracy ± 0.001˚C Display of Direct Reading of CALORIFIC VALVE with thermal printer Menu driven settings for parameters LCD display Buzzer based alarm facility Memory storage for input data in software Erroneous messages displayed in case of Fuse wire open No paper and Printer door open indicator. USB interface with PC through software Along with all essential accessories (As per details above) for operation of bomb calorimeter. Optional: Automatic Gas Filling System Oxygen Cylinder

Silent Features: ➤ This mechanism provides Simultaneously Rotating and Tapping Motion to the Cylinders for packing the sample under test evenly and uniformly together. ➤ Complies with USP, IP specifications ➤ Extremely useful for pharmaceutical labs ➤ Microprocessor based, easy to use ➤ 20 x 4 line alphanumeric LCD display with backlit ➤ 16 Soft touch membrane type keys ➤ Independent programmable setups for User & USP mode with storage ➤ RS232 Printer attachment facility ➤ Automatically calculate result parameters like Tap Density, Initial Density, Compressibility Index and Hausner Ratio ➤ Automatically stores last Result ➤ Power Failure detection facility ➤ User friendly operation with menus & current status indicators. Technical Specifications: ➤ Tap Height : USP-I : 14mm ± 2mm, USP-II : 3mm ± 0.3mm ➤ Taps/Minute : USP-I : 300 ± 15, USP-II : 250 ± 15 ➤ No. of Tap Counts : 1 to 9999, (No. of Stations: 2) ➤ Type of Drive : Direct Drive with Stepper Motor ➤ Printer Accessories : Attachment of RS232 printer with Serial interface ➤ Electrical Supply : 230 V AC ± 10%, 50/60 Hz, 44VA

It consist of an inbuilt prefilter & very high exchanging capacity non-corrosive CATION & ANION Resin, columns prefilled with imported Resins for efficient results having treated water parameters. Fitted with a sturdy PVC multi control valve & can be connected direct to water taps. Fitted with analog / digital conductivity meter. Supplied with one plastic chemical proof regeneration tank & the complete unit is housed in a painted M.S. trolly for easy mobility. Features: • Digital Display • Non corrosive Regeneration Tank •In Built Pre filter High capacity Cation and Anion exchange resins. Upflow treatment. Easily portable - metal stand and trolley Can be connected direct to Water Tap. Simple Periodic regeneration - negligible operating costs. Digital model is fitted with digital conductivity meter. Treated water will have the conductivity less than 10 ms/cm and pH of 7.5-9 • Available in Double Bed, Four bed and Mixed bed models Capacity: 50 Ltrs / Hr. 70 Ltrs / Hr. 100 Ltrs / Hr. 200 Ltrs / Hr. 500 Ltrs / Hr.

This is yodar type, motor driven sieve Shaker for carrying out wet sieve analysis of materials. Consists of a water reservoir and 1, 2 and 4 holders, for holding 7 no. sieve’s (Optional) on each holder of 8″ dia. Shaker is driven by Single Phase Motor through a belt drive. Shaker mechanism moves the sieves up and down in the reservoir. The reservoir has a water out-let for draining out the used water. Suitable for operation 230 V A.C. Single Phase. Optional: Mechanical Timer 0-60 minute OR Digital Timer

The instrument is powered by an electromagnetic drive which has no rotating parts, making it maintenance free and extremely quiet in operation. The unit has been designed for user friendly operation. The top plate of the Sieve shaker has clearly marked calibrated lines to aid visual inspection of the amplitude.