(S.S. 316 BODY) Seal membrane by hand tightening locking wing nuts, optimal holder designed to minimizes resistance and maximizes flow rate. Applications: Use in line for filtering gases or liquids Use with pressure vessel for batch type operations

“Optics Technology” Homogenizer are light weight & hand held design that can be easily operated by single hand with less strain during long period of operations. Working Principle: The sample circularly loop into a narrow space between the high speed and relative motion stator to shear and break the sample. E.g. tissue such as muscle, liver, breast etc. Can be completely homogenization is 10-30 seconds. Parameters: Type : Hand Held Homogenizer Power Supply : 230V/50/60HZ Power (Input/Output) : 110W Rotor Line Speed : 6.3-14m/sec Net Weight : 0.7kg Noise : 72dB(A) Speed Control Range : 8000-35000rpm (digital display) Capacity : 1-100ml

The tank has been designed to accommodate casted cubes and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each cube. Product Specification: Material : SS/MS Body Power Supply : 220V Temperature Accuracy : ±1°C Usage/Application : Curing of Concrete Block Working Temperature : 27°C Voltage : 220V Frequency : 50 Hz Phase : Single Size : 4x3x2 Feet (700Ltrs.) Note: Size are also customized The tank has been designed to accommodate cube moulds and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 27°C ± 1°C and expect for the 15 minutes after immersion of the freshly made specimens. As per comply IS 269 & IS 516 (Methods of tests for Strength of Concrete) after the period of 24 hours, specimens of Cubes, cylinders, beams etc. shall be marked for later identification, removed from the moulds and, unless required for 24 hours. Records of the daily max. & Min. temperature shall be kept both during the period of specimen remain on the site and in the laboratory.