Basically used to reduce particle size during homogenizing, mixing emulsifying, dispersing etc. Material is process between high speed rotor and stator in colloid mill made up of SS (Stainless Steel) 304 material should be feed in a cone shaped hopper and also very quick and easy cleaning just by flushing water or any other suitable solvent.

It is a type of mixer that can use to produce a homogenous solid mixer mainly use for material like semolina flour & pharmaceutical granules. “Optics Technology” Mixers are designed and developed using premium class material and with modern technology. Specification: Double cone blender has an attractive structure that is easy to clean and operate. Working stability is high and less noise. Has very high uniformity for blending of almost all material. Low power and easy operation. Technical Details: Material Grade : Stainless Steel 304 Automatic Grade : Automatic Power : 220V Power Source : Electrical Phase : Single Model Capacity OT-DCB-325 SS-A 5 kgs OT-DCB-325 SS-B 10 kgs OT-DCB-325 SS-C 20 kgs OT-DCB-325 SS-D 50 kgs OT-DCB-325 SS-E 100 kgs OT-DCB-325 SS-F 200 kgs Application: Nutraceutical, Food, Pharmaceutical, Chemical, Cosmetic and various others.

The apparatus consists of an evaporating flask by DC motor in a heating water bath. Vacuum Distillation of solvent at high and low temperature is achieved quickly and efficiently by use of a variable speed motor, which prevents foaming and bumping of the liquid (solvent) into the evaporating flask and also distillation under controlled atmosphere. The evaporating flask is pear shaped to give a large surface area of evaporation and is clamped to a glass duct, which goes through the drive unit and produced into the condenser. The condenser is fitted with standard joint at the top and the bottom for receiver flask the unit is fitted with quick action.

For testing penetration in grease/ creams. It consists of a vertical pillar mounted on a base, the head, together with diameter plunger rod and cone (or needle) slides on a pillar and can be clamped at any desired height. The dial graduate from 0 to 400 in 1/10 millimeter subdivisions. Supplied with a penetration needle, ring weights and two sample containers with Digital Timer.

Electric Bunsen, consumes approximately 350 watts, and it has numerous application in laboratory for heating test tube, crucibles, small flasks. Heating element within a conically shaped refractory crucible which is enclosed in a stainless steel casing with proper insulation. The element attains the temperature range of 800°C to 900°C complete with energy regulator and cable suitable for operation on 220.V.A.C. Optional: Microprocessor Based PID Controller

Body and inner parts are made of brass OT-SD-291-A Hopper Capacity: 1 Kg OT-SD-291-B Hopper Capacity: 3 Kg

Electric motor Material Principle : 0.5H.P (Minimum) Single phase : Hopper - Chrome Plated Brass Pipe-S.S Base body: Cast Iron/ Aluminium : Centrifugal action, Motor Driven Hopper capacity: 2 Kg Power Size : 230V/1ph/50Hz : 38 H x 31 W x 51 D cm (Approx)

SINGLE PUNCH ➤ Operated by circulating wheel provided on side powder is filled in a cone type cavity on top controlled automatically by a moving feeder provided the compressor pressure on tablet is controlled by adjusting by lever. ➤ Useful for making tablets upto 100mg & size of Punch & Dia is 6-8mm (with 1 set of Punch & Dia)

SINGLE PUNCH Built on heavy cast iron body with a stainless steel hopper on top and connected by a rubber tube working on 220V AC and single phase. Automatic compression and ejection device with each revolution of the wheel drive. Size of Punch & Dia is 12-13mm. Punch & Dia set made of stainless steel. Provided only 1 No. Dia & Punch along with the machine. Features: ➤ Easily rotating wheel for making tablets. ➤ Compressing lever for adjustable hardness of tablets ➤ Adjustable lower punch for adjusting the thickness. Model Capacity OT-TMM-323/2A 100mg/150mg/250mg OT-TMM-323/2B For upto 500mg(2H.P. Motor) OT-TMM-323/2C For upto 1000mg(3H.P. Motor) Optional : Spare Dia & Punch