“Optics Technology” offers digestion and distillation combined unit. A maximum of 6 mantles which are made of a knitted layer of glass fabric combined with flexible heating elements, encased in mild steel housing. Temperature ranges from ambient to 350ºC controlled by Sunvic energy regulator with either a single control or individual controls, with corresponding indicating lamps. The distillation units are provided with a fume duct, which is held by clamps (provided with the unit) suspended on a stand having mobility for both horizontal and vertical movements. The digestion units are provided with the above features along with a condensing tank with individual condensing taps. They are placed on a MS angle stand with their respective controls supplied with / without any glass parts. Works on 220V Mains supply.

Superior quality steel is used for manufacturing offer range of mixing tank S.S. tanks are manufactured by us for various industries like pharma, chemical, agricultural, food processing etc. • Stainless steel 304 body with insulation or normal. Dished, conical and flats ends. • Motors and gearbox drive as specified by customer. • Level indicator installed. • Agitating paddle. • Horizontal and vertical agitation provided. • Anti-corrosive and efficient functioning vessels. Model No. Capacity OT-SSMT-207-A 50 Gallons (190 Ltr. Approx) OT-SSMT-207-B 100 Gallons (380 Ltr. Approx) OT-SSMT-207-C 150 Gallons (570 Ltr. Approx)

The tank has been designed to accommodate casted cubes and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each cube. Product Specification: Material : SS/MS Body Power Supply : 220V Temperature Accuracy : ±1°C Usage/Application : Curing of Concrete Block Working Temperature : 27°C Voltage : 220V Frequency : 50 Hz Phase : Single Size : 4x3x2 Feet (700Ltrs.) Note: Size are also customized The tank has been designed to accommodate cube moulds and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 27°C ± 1°C and expect for the 15 minutes after immersion of the freshly made specimens. As per comply IS 269 & IS 516 (Methods of tests for Strength of Concrete) after the period of 24 hours, specimens of Cubes, cylinders, beams etc. shall be marked for later identification, removed from the moulds and, unless required for 24 hours. Records of the daily max. & Min. temperature shall be kept both during the period of specimen remain on the site and in the laboratory.

The tank has been designed to accommodate casted cubes and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each cube. Product Specification: Material : SS/MS Body Power Supply : 220V Temperature Accuracy : ±1°C Usage/Application : Curing of Concrete Block Working Temperature : 27°C Voltage : 220V Frequency : 50 Hz Phase : Single Size : 4x3x2 Feet (700Ltrs.)

It consist of an inbuilt prefilter & very high exchanging capacity non-corrosive CATION & ANION Resin, columns prefilled with imported Resins for efficient results having treated water parameters. Fitted with a sturdy PVC multi control valve & can be connected direct to water taps. Fitted with analog / digital conductivity meter. Supplied with one plastic chemical proof regeneration tank & the complete unit is housed in a painted M.S. trolly for easy mobility. Features: • Digital Display • Non corrosive Regeneration Tank •In Built Pre filter High capacity Cation and Anion exchange resins. Upflow treatment. Easily portable - metal stand and trolley Can be connected direct to Water Tap. Simple Periodic regeneration - negligible operating costs. Digital model is fitted with digital conductivity meter. Treated water will have the conductivity less than 10 ms/cm and pH of 7.5-9 • Available in Double Bed, Four bed and Mixed bed models Capacity: 50 Ltrs / Hr. 70 Ltrs / Hr. 100 Ltrs / Hr. 200 Ltrs / Hr. 500 Ltrs / Hr.

Fumigators for Pharmaceutical, Food & Dairy, Biotech industries generate high density fog with droplets size of 5-15 microns, which helps in providing maximum thrust, deeper penetration & wide spread of aerosols. Some of the common application areas it is used in this industry include Injectable, Vaccines, Tablets, Parentrals, IV fluids, Medical devices, bulk drug manufacturing areas, QC & QA areas, Microbiology lab, R&D Center, Clinical drug trial centre, Tissue culture Laboratories, Pathology Laboratories and many more. Capacity 6 Ltr. Optional : Humidistat (To Control Humidity) (Knob Type) OR Digital Humidity Controller Mechanical Timer (0-60 minutes) OR Digital Timer 360° Rotation System

The digestion units are provided a condensing tap with individual condensing taps. They are placed on a MS angle stand with their respective controls supplied with/without any glass parts. Works on 220V mains Supply. It is used to determine organic nitrogen (N2) content in the substance. Mantle with heater assemblies are recessed into the top insulating board to minimize accidental personnel contact with a hot heater element Digestion unit cabinet is made of M.S. Body duly powder coated. The top is made of 3 Test / 6 Test thick insulating board which protects wiring and controls from heat, ensuring longer life.

We will provide copper cooling coils around outer surface of the tank. Which will be properly insulated & will be connected to a condenser & compressor built-in the machine (Chiller system) this will control bath temperature as per your requirement.

The apparatus is suitable for testing of Dissolution rate of tablet and capsule, it consists of main transparent acrylic tank housing. Thermostatically/ Digitally controlled immersion heater, drain cock and transparent hemispherical unbreakable vessel. The base unit is made of chemical resistant powder coated sturdy frame housing, Control panel which includes Electronic regulator and thermostat. An electronic motor is mounted on chrome plated rod, operates Paddle/Basket. (Body is Available in M.S. / S.S. 304). Optional: Digital RPM Indicator Digital Timer Microprocessor Based PID Controller