A state of the Art Co2 Incubator. Non dispersive Infrared Co2 Sensor. Advanced design provides a very stable drift-free output requiring less frequent calibration. With S.S. 304 Pan placed in the bottom of chamber to be filled by distill water to achieve Humidity Relative Humidity level up to 95%. Air Jacketed Humidity With Silicon Gasket LCD Controller 3 Program’s : Temp. & Time based Front Door made of Toughened Glass Normal Working Light

This is recommended only where inside condition air of jar is removed through vacuum pump and CO2 is filled in the jar through CO2 gas cylinder to generate anaerobic conducting in the jar. Transparent Anaerobic Culture Jar of 3.5 lit. capacity made of Polycarbonate. The lid of the jar is made of Aluminium Pressure die casting fitted with Pressure valve, Vacuum valve, Safety valve & Compound Pressure cum vaccum gauge, three finger aluminium clamp and sealing “O” ring and Air / Gas chuck. Supplied with: Petri Plate Carrier - Stainless steel for 10 petri Dishes. Test Tube Carrier - Stainless Steel.

In bomb of bomb calorimeter gas filing is done by this device (To avoid manually filling of oxygen in the bomb). The system is electrically controlled and stops automatically once the gas is filled at pre set pressure value.

(Direct Reading of CALORIFIC VALVE with Printer) BOMB IS MADE OF SS 316 Temp. Accuracy ± 0.001˚C Display of Direct Reading of CALORIFIC VALVE with thermal printer Menu driven settings for parameters LCD display Buzzer based alarm facility Memory storage for input data in software Erroneous messages displayed in case of Fuse wire open No paper and Printer door open indicator. USB interface with PC through software Along with all essential accessories (As per details above) for operation of bomb calorimeter. Optional: Automatic Gas Filling System Oxygen Cylinder

Features: • High temperature 1300°C • Instant ignition with press of a button and with flame reducer • Utilises butane gas and can give flame for the period of up to 1 hour; does not require LPG cylinder; and can be refilled easily in the laboratory using butane gas cylinder • Fuel capacity: 35 g

The vacuum pump functions by removing the molecules of air and other gases from the vacuum chamber. It is available in single-stage & Double Stage with oil & belt Motor System. It is designed for accurate measurement of melting points and for checking the melting range of the solid samples & boiling points also.

TWO-STAGE VANE PUMP To improve the backing pressure and displacement at low pressure two stages are connected in series. ANTI-SUCKBACK SYSTEM If the Power Supply fails on stops, an anti-suck back device. Prevents air or oil the pump to be drawn back into the chamber being evacuated and operated by Solenoid coil. GAS BALLAST The gas ballast allows a quantity of air to be injected into the second stage of the pump during compression to reduce the partial pressure to the pumped gas below its saturated Vapour pressure and thus prevent condensation. The saturated vapour pressure of a gas is higher when it is hot and lower when it is cold. When gas ballasting is in use, there will be increase in ultimate pressure of the pump as well as the temperature. Power : 230V AC supply Optional: Moisture Trap Non Return Valve Vacuum Gauge Air Oil Mist Exhaust Filter

(S.S. 316 BODY) Seal membrane by hand tightening locking wing nuts, optimal holder designed to minimizes resistance and maximizes flow rate. Applications: Use in line for filtering gases or liquids Use with pressure vessel for batch type operations

Temp. Range: (- 20°C) Handle : Yes Power-on (Indicator Light Green) : Yes Number of Gasket : 1 Temp. controlled by Microprocessor based Temp. Controller (Digital LED Display) Eco friendly refrigerant CFC free Heavy Duty Compressor