Double-walled Inner Chamber S.S. 304 & Outer M.S. Duly Powder Coated / S.S. 304. PUF Insulated Temp. Range 5°C to 50°C Cooling Compressor. Copper Cooling Coils Welded throughout on the Outside of the S.S. Chamber. Body Mounted on sturdy Angle Iron Frame with Caster wheels for easy movability. Temperature controlled by Microprocessor Based PID Controller, provided with circulating Pump.

Temp Controlled By Microprocessor Based PID Controller Temp range: (+) 2°C to (+) 8°C CFC Free Compressor. Caster wheel mounted cabinet. With LED Light The inner chamber is properly Insulated with special grade PUF to prevent thermal losses. Air Circulating Fan for uniform temperature.

Temp. Range: ( -20°C / -40°C) “State of Art Technology” Puff Insulated to Prevent Thermal Losses. Specially Designed Combination of Fixed & Pull Out Drawer System for Storage, Temp. Controller, Fast Freeze Button & Lamp, Very Low Noise, Plastic Body, Solid Door & CFC Free Heavy Duty Compressor, Wheels on Rear Side. Works on 220V AC / 50 Hz Mains. Temp. controlled by Microprocessor based Temp. Controller Eco friendly refrigerant CFC free Heavy Duty Compressor

Puf insulated to prevent thermal losses Eco friendly refrigerant CFC free Heavy Duty Compressor Temp. controlled by Microprocessor based Temp. Controller (Digital LED Display) Very low noise Lock & key arrangement Door is sealed with Silicon Gasket Heavy duty Castor Wheels Mounted for easy movability Works on 220 VAC / 50Hz Mains.

Multi-Layered Sticky mats effectively capture containment particles from foot traffic and wheels before entering a critical environment. The sticky mats are composed of 30 easy to peel-off disposable sticky mat sheets which are especially designed to meet clean room needs and are suitable for microelectronics, pharmaceutical, medical, aerospace, food processing & packaging Industries.

To maintain Temp. below 35°C Inner body is made of S.S. 304. Outer Body made of M.S. Duly Powder Coated / S.S. 304 Temp. Controlled by Microprocessor Based PID Controller With an Accuracy of ± 0.5°C Temp. Range +5°C to 50°C “Hermetically sealed” CFC Free Compressor of “Kirloskar” / Tecumseh with kit (Condensor, Fan, Motor, Compressor in 1 set) The inner chamber is properly insulated with special PUF to prevent thermal losses. Heating by Stainless Steel heaters with fins. Full length inner view flexi glass door. Lock & Key arrangement Caster wheel mounted cabinet for easy movability With 2 No. Air Circulating Fan for uniform temperature. Eco friendly CFC free compressor Special Features: Door operated Light illumination system inside the chamber. Specially designed adjustable S.S. wire mesh Shelves for uniform Temp. Specially designed voltage protection device to protect the instrument from voltage fluctuation. Digital Graphical Display of Voltage. With Automatic On/Off Function system for Fan Calibration Certificate with NABL Traceability will be provided free of cost.

To maintain Temp. below 35°C Inner body is made of S.S. 304. Outer Body made of M.S. Duly Powder Coated / S.S. 304 Temp. Controlled by Microprocessor Based PID Controller with an Accuracy of ± 0.5°C Temp. Range +5°C to 50°C “Hermetically sealed” CFC Free Compressor of “Kirloskar” / Tecumseh with kit (Condenser, Fan, Motor, Compressor in 1 set) The inner chamber is properly insulated with special PUF to prevent thermal losses Heating by Stainless Steel heaters with fins. Full length inner view flexi glass door. Lock & Key arrangement Caster wheel mounted cabinet for easy movability With 2 No. Air Circulating Fan for uniform temperature. Eco friendly CFC free compressor Special Features: Door operated Light illumination system inside the chamber. Specially designed adjustable S.S. wire mesh Shelves for uniform Temp. Specially designed voltage protection device to protect the instrument from voltage fluctuation. Digital Graphical Display of Voltage With Automatic On/Off Function system for Fan Calibration Certificate with NABL Traceabilit will be provided free of cost. Optional: Microprocessor Based Touch Screen Display System Online transfer of data without any Cable/Wire interference 21 CFR Software (For Non-Editable Data)

These are overhead clean air modules mounted with Stainless steel frame on the ground. Units can be built with / without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling / Dispensing of Raw Material, Basic Compounds, Active Compounds. It works on the principal of Laminar Air Flow with HEPA Filters & Pre-Filters. This will act as a CLASS 100 Room. Protection of the personnel in the cabinet from the processed substances by vertical flow with Reverse Flow of clean air protection of the raw and intermediate products to be processed. Protection of the room where the cabinet is built up and environment from highly active substance which otherwise would disperse in the room and escape in the atmosphere unfiltered. Safe collection and deposition of substance released during work. Features: • M.S Powder Coated / Stainless Steel 304 Body • Hepa Filter (0.3 Micron) • Fine Filter (5 micron) • Pre-Filter (10 micron) at Arrestance 90% • Motor Blower Assembly • U.V. Light • Fluorescent Lamp Operating Switch • Static Pressure Manometer • Stainless Steel Standing Base • High quality HEPA filter provides protection for the product (filtration • efficiency of more than 99.97% at 0.3 micron). • Ultra-quiet noise level of not more than 65 dBA. • Durable and easy to clean stainless steel body. • Work area properly illuminated by diffused glare free fluorescent light. PVC Flexible Curtains on all the three sides. Specifications: Air Velocity : 90 ± 20 FPM (Average) Filtration Elements : Main Filters - HEPA Filter Prefilter : Washable non-woven polyester fibers. Light Intensity : 800-1000 Lux Power Supply : 220V Single Phase, 50 Hz. Model No. Working Size W x D x H OT-SB-215-MS/SS-A 2' X 2' X 6' OT-SB-215-MS/SS-B 3' X 2' X 6' OT-SB-215-MS/SS-C 3' X 3' X 6' OT-SB-215-MS/SS-D 4' X 2' X 6' OT-SB-215-MS/SS-E 4' X 3' X 6' OT-SB-215-MS/SS-G 6' X 4' X 6' OT-SB-215-MS/SS-H 6' X 6' X 6' OT-SB-215-MS/SS-I 8' X 4' X 6' OT-SB-215-MS/SS-J 8' X 6' X 6' OT-SB-215-MS/SS-K 8' X 8' X 6'

These are overhead clean air modules mounted on roof or with steel frame on the ground. Units can be built with / without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling / Dispensing of Raw Material, Basic Compounds, Active Compounds, works on the principle of laminar air flow with HEPA Filters & Pre-Filters. Static pressure manometer. Available in Wooden / M.S. body duly powder coated / Stainless steel body.