The Thin Layer applicator gives dependable service in drawing thin uniform layer variables from 0 to 2 mm. (Minimum thickness attainable 0.1 mm.) Accurate design and skilled workmanship of the applicator gives no trouble in coating several plates at a time. It is made up of Aluminium finished in proper shape. Applicator: Drawing Board, Drying Rack, Spotting Guide, Developing Chamber, Glass Pipette, Silica Gel, Glass Plates & Glass Jar.

“Optics Technology” Ductless Fume Hood basic offers variety of functionlities. Body is made of Wooden / M.S. Duly Powder Coated / S.S. 304. Eco friendly and cost effective. Mini pleat Hepa Filter of 0.3µ of an efficiency of 99.97% down to 0.3µ media is of glass fiber & made of pleates back & frow & packed in a anodized aluminum frame with carbon filter. Working table is covered with Chemical Resistant Granite. Front door is made of 6mm clear glass in Aluminium Frame duly Powder coated and connected with a counter weight balance through a nylon rope. The door will have the provision of vertical sliding facility. Internal Structure is coated with acid & fire resistance coating. Front door is made of 6mm clear toughened glass with easily sliding of up & down position. Exhaust blower of single phase Electric motor (1 H.P.) with 2500 RPM connected which is inbuilt in the hood. Ventilated base with storage cabinet of selection off drawer & doors. Light luminance of 140 lux with light lamp of anti corrosive. Power Supply: 220 V AC, Single Phase, 50 Hz. Optional: Base storage cabinet Air Flow Monitor (LCD Display). P.P. Sink with Swan Neck Water Tap Automatic motorized front door lifting arrangement. Scrubber System

“Optics Technology” Ductless Fume Hood basic offers variety of functionlities. Body is made of Wooden / M.S. Duly Powder Coated / S.S. 304. Eco friendly and cost effective. Mini pleat Hepa Filter of 0.3µ of an efficiency of 99.97% down to 0.3µ media is of glass fiber & made of pleates back & frow & packed in a anodized aluminum frame with carbon filter. Working table is covered with Chemical Resistant Granite. Front door is made of 6mm clear glass in Aluminium Frame duly Powder coated and connected with a counter weight balance through a nylon rope. The door will have the provision of vertical sliding facility. Internal Structure is coated with acid & fire resistance coating. Front door is made of 6mm clear toughened glass with easily sliding of up & down position. Exhaust blower of single phase Electric motor (1 H.P.) with 2500 RPM connected which is inbuilt in the hood. Ventilated base with storage cabinet of selection off drawer & doors. Light luminance of 140 lux with light lamp of anti corrosive. Power Supply: 220 V AC, Single Phase, 50 Hz. Optional: Base storage cabinet Air Flow Monitor (LCD Display). Touch Screen Model (Air Flow Touch Screen Display) P.P. Sink with Swan Neck Water Tap Automatic motorized front door lifting arrangement. Scrubber System

Rotates specimens in horizontal plane in 3/4” circles, constructed of mild steel finished with stoved enamel point, Turned up edges and rubber sheeting on platform to prevent slipping of specimen containers, platform rigidly supported by steel legs for smooth and silent rotation, mounted on four rubber suction feet to prevent creeping.

Newly designed for all application and process requiring excellent radial and perfect temperature uniformity. Heavy gauge M.S. exterior finished with epoxy powder coated. Light weight laboratory tube furnace have special ceramic fiber insulation. Temp. Controlled by Microprocessor based PID Temp. Controller having digital indication for set and process temperature. The control system includes over temperature solid state safety fuse which cuts the power in case of temperature exceeds. Operates on 230 volts. Max Working Temperature Range: 900°C, 1100°C, 1400°C

BOMB IS MADE OF SS 316 Temp. Accuracy ± 0.01˚C Bomb Calorimeter outfit provides a simple and inexpensive method for determination of heat of combustion of organic matter and the calorific value of solid & liquid fuel. The outfit supplied is complete for analysis as per the method recommended by British standard institution BS 1016. All parts of the outfit have been finished of petroleum and British Standard Institute.

This is recommended only where inside condition air of jar is removed through vacuum pump and CO2 is filled in the jar through CO2 gas cylinder to generate anaerobic conducting in the jar. Transparent Anaerobic Culture Jar of 3.5 lit. capacity made of Polycarbonate. The lid of the jar is made of Aluminium Pressure die casting fitted with Pressure valve, Vacuum valve, Safety valve & Compound Pressure cum vaccum gauge, three finger aluminium clamp and sealing “O” ring and Air / Gas chuck. Supplied with: Petri Plate Carrier - Stainless steel for 10 petri Dishes. Test Tube Carrier - Stainless Steel.

The test is used for determining liquid absorptiveness or resilience of treated and untreated paper, board, fabrics and other sheet materials. The test consists of a test apparatus, its 10 kg roller and blotting paper. The roller method is recommended to insure better consistency and reliability that can be obtained by manual blotting or rubbing the specimen. Specification: Standard test area : 100 cm2 Metal roller : 10 kg + 0.5 kg Dimensions: Depth : 150 mm Height : 275 mm Width : 330 mm Features: ➤ One Universal model to test paper, Board and water proof board. ➤ Three graduations of height 10, 25 and 100 mm as specified in TAPPI 441 for Paper, Corrugated Board and Waterproof Board respectively. ➤ Adjustable clamp pressure mechanism for necessary required clamping pressure to prevent water leakage during clamping. ➤ Aluminium Block and steel Roller for rust proof and longer life.

➤ Easy location of plastic container underneath the heating pad ➤ Effortless compression spring pressing device/ lever during the sealing operation ➤ Easily operate sealing pad height adjustments for different sizes of plastic containers ➤ Thermostat (Temp. control) to adjust according to the thickness of plastic cap/roll