The instrument is used for accurately measure the mass of a substance. Easy to read Backlight LCD Display it provide User-selectable environmental filters and brightness settings. Specification : ➢ High Resolution, Quick Weighing ➢ Based on E.M.F.C. Technology ➢ Tare range upto max. Capacity ➢ Multiple Weighing Units ➢ Auto – Timing Calibration ➢ Percentage (%) Weighing ➢ Level Indicator, Adjustable fit ➢ Counting Weighing mode ➢ Units Conversion and data output ➢ 230 V AC Power supply

(AEROSOL DISINFECTOR, FUMIGATOR) It is specially designed to create Humidity in a particular area in Green Houses, Tissue Culture, Labs, Pharmaceuticals, Packing, Printing Industries etc. For Disinfection in Operation Theaters, Path Labs, Microbiology labs, Pharmaceutical industries in Production Departments and other R & D Laboratories. Optional: Humidistat (To Control Humidity) (Knob Type) OR Digital Humidity Controller Mechanical Timer (0-60 minutes) OR Digital Timer

The instrument is used for accurately measure the mass of a substance. Easy to read Backlight LCD Display it provide User-selectable environmental filters and brightness settings. Specification : ➢ High Resolution, Quick Weighing ➢ Based on E.M.F.C. Technology ➢ Tare range upto max. Capacity ➢ Multiple Weighing Units ➢ Auto – Timing Calibration ➢ Percentage (%) Weighing ➢ Level Indicator, Adjustable fit ➢ Counting Weighing mode ➢ Units Conversion and data output ➢ 230 V AC Power supply

Max. Temp. 200ºC It has a speed regulator for varying speed of stirring Teflon coated stirrer paddle will be provided Speed control through Knob With Energy Regulator for temperature An energy regulator supplies power to the heating element a certain percentage of the time depending upon the dial setting Easy to clean Maintain. Speed up to 1200 RPM Electric supply : 220 – 240 V, 50 Hz single phase

TWO-STAGE VANE PUMP To improve the backing pressure and displacement at low pressure two stages are connected in series. ANTI-SUCKBACK SYSTEM If the Power Supply fails on stops, an anti-suck back device. Prevents air or oil the pump to be drawn back into the chamber being evacuated and operated by Solenoid coil. GAS BALLAST The gas ballast allows a quantity of air to be injected into the second stage of the pump during compression to reduce the partial pressure to the pumped gas below its saturated Vapour pressure and thus prevent condensation. The saturated vapour pressure of a gas is higher when it is hot and lower when it is cold. When gas ballasting is in use, there will be increase in ultimate pressure of the pump as well as the temperature. Power : 230V AC supply Optional: Moisture Trap Non Return Valve Vacuum Gauge Air Oil Mist Exhaust Filter

Heating block type Temperature range from 5°C above ambient to 150°C ± 1°C. Designed with glass reactions vessels and air condensers. Supplied with stand to accommodate vessels Operate on 230 volts, 50 Hz, single phase. With Digital Temperature controller cum digital timer along with glass parts.

(DOUBLE WALLED) Inner S.S. 304 and Outer M.S. Duly Powder Coated / S.S. 304 Gap between the walls is filled with special PUF Insulation. Temp. & Humidity is controlled by Digital Temp. & Humidity Controller and Digital volt meter. Atmospheric conditions are created within the chamber. Humidity is created in a S.S. Water Reservoir fitted at the back to provide 40% to 95% ± 3% RH Humidity. Complete with Cord & Pulg to work on 220 Volts A.C. Optional: Microprocessor based Temp. & Humidity Controller Microprocessor based Touch Screen Display System 21 CFR Software (For Non Editable Data)

(DOUBLE WALLED) Inner S.S. 304 and Outer M.S. Duly Powder Coated / S.S. 304 Gap between the walls is filled with special PUF Insulation. Temp. & Humidity is controlled by Digital Temp. & Humidity Controller and Digital Volt Meter. Temp. from 5ºC to 60ºC ± 1ºC & humidity is created in a S.S. water Reservoir fitted at the back to provide Atmospheric Humidity upto 95%±3% RH. Optional : Microprocessor based Temp. & Humidity Controller Microprocessor based Touch Screen Display System 21 CFR Software (For Non Editable Data)

A state of the Art Co2 Incubator. Non dispersive Infrared Co2 Sensor. Advanced design provides a very stable drift-free output requiring less frequent calibration. With S.S. 304 Pan placed in the bottom of chamber to be filled by distill water to achieve Humidity Relative Humidity level up to 95%. Air Jacketed Humidity With Silicon Gasket LCD Controller 3 Program’s : Temp. & Time based Front Door made of Toughened Glass Normal Working Light