nner chamber is made of thick Stainless Steel (304). Outer body is made of thick Mild Steel / Stainless Steel 304. The chamber is absolutely leak proof and can be operated at any Selected point in between 5 to 20 pounds per sq. Inch. It is provided with pressure gauge, pressure release valve, S.S. Basket, safety valve, water level indicator with cord, Plug & Pressure Control Switch. It is provided with Radial Locking System with Automatic Water Level cut off device for element as a safety feature and Digital Temp. Controller Cum Timer. Temperature Range 121ºC ptional: Vacuum Breaker Valve Calibration Port Safety Alarm Specially designed Lid locking system to make sure lid is locked properly Single channel data logger system (Only with Automatic Model) Printing System with Thermal Printer 21 CFR Software Automatic System (Only for Normal Autoclave Vertical Model) OR Microprocessor Based Automatic Touch Screen Display System with Data Logging

It’s the most ideal ‘LEAK TEST’ instrument for checking Blister Packs and Strips / Pouches. The Vacuum Pump ensures that a high level of vacuum is created in the shortest possible time. A vacuum gauge is provided to indicate the vacuum level. A 0 to 5 minute timer helps the operator attend to other chores at a time. Specifications: OT-LTA-25/10 OT-LTA-25/12 Desiccator Diameter 250mm (10“ Dia) 300mm (12” Dia) Rating 5A 230V Single Phase Vacuum Level 30“ Hg Timer 15 minute (Mechanical/Digital) Desiccator Polycarbonate Body Stainless Steel 304 Actual Size (Inches) 20” (W) x 14“ (D) x 10.5” (H)

The vacuum pump functions by removing the molecules of air and other gases from the vacuum chamber. It is available in single-stage & Double Stage with oil & belt Motor System. It is designed for accurate measurement of melting points and for checking the melting range of the solid samples & boiling points also.

TWO-STAGE VANE PUMP To improve the backing pressure and displacement at low pressure two stages are connected in series. ANTI-SUCKBACK SYSTEM If the Power Supply fails on stops, an anti-suck back device. Prevents air or oil the pump to be drawn back into the chamber being evacuated and operated by Solenoid coil. GAS BALLAST The gas ballast allows a quantity of air to be injected into the second stage of the pump during compression to reduce the partial pressure to the pumped gas below its saturated Vapour pressure and thus prevent condensation. The saturated vapour pressure of a gas is higher when it is hot and lower when it is cold. When gas ballasting is in use, there will be increase in ultimate pressure of the pump as well as the temperature. Power : 230V AC supply Optional: Moisture Trap Non Return Valve Vacuum Gauge Air Oil Mist Exhaust Filter

Features • 128 x 64 dots Graphical LCD Display •Auto Temperature Compensation Auto Ranging Facility • 1000 Samples Storage Facility Printer Attachment Facility Conductivity, TDS & Temp. Measurements Accuracy 0.5% FS1Digit

These are specially designed to meet laboratory requirement of convenient stirring in flask with simultaneous uniform heating by heating mantles. These have two tier constructions with the upper compartment consisting of heating element. Accurate stepless speed control allows smooth variation up to 1200 RPM. Heating energy is controlled by energy regulator.

Light Weight High Temp. Ceramic Fiber Wool Insulation. Outer Body Double Walled Thick M.S. Body Duly Power Coated Sheet With Step-down Transformer, Silicon Carbide Rod & Microprocessor Based PID Controller.

DIGITAL TEMPERATURE CUM HUMIDITY INDICATOR

INDICATOR (Contact Type) Battery Operated With S.S. Temperature Probe